LB-030-10 HARRINGTON HOIST AND CRANE
3" TON LEVER HOIST WITH 10' LIFTING CHAIN, ALL STEEL CONSTRUCTION, TOTALLY ENCLOSED BRAKE MECHANISM-HRHLB03010 >
Recently Viewed
3" TON LEVER HOIST WITH 10' LIFTING CHAIN, ALL STEEL CONSTRUCTION, TOTALLY ENCLOSED BRAKE MECHANISM-HRHLB03010 >
Kuri Tec® SJMD200x50 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 50 ft L, 150 psi Working, Rubber/Polyester, Import
Kuri Tec® SJMD200x50 SJMD Contractor Grade Mill Single Jacket Discharge Hose, Hose End Style, 50 ft L, 150 psi Working, Rubber/Polyester, Import
Morse® 131179 MHSTK Hole Saw, 1-1/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
Morse® 131179 MHSTK Hole Saw, 1-1/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
RIDGID® 46205 Eye Bolt Assembly, For Use With: Model 300/300A Power Drive
RIDGID® 46205 Eye Bolt Assembly, For Use With: Model 300/300A Power Drive
Leviton® L7981 Bus Drop Duty Closed Mesh Single U-Eye Single Weave Support Grip, 1100 lb Breaking Strength, 0.22 to 0.32 in Cable, Bronze, Tin Coated
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Remke Tuff-Seal™ 7303-005R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.7 to 0.97 in Cable, For Use With 1 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
