101312 JET EQUIPMENT AND TOOLS
1-TON L-90 30'-LIFT CHAIN HOIST-JET101312 >
Recently Viewed
1-TON L-90 30'-LIFT CHAIN HOIST-JET101312 >
Charlotte CTS 02309 1000 45 deg Elbow, 1 in Nominal, Socket End Style, CPVC, Domestic
FlowGuard Gold CPVC CTS is for hot and cold water distribution. It is for pressure systems where temperatures will not exceed 180 deg F. It can withstand high pressure for long periods, does not rust or corrode,
Apex® A-314 Socket and Ratchet Wrench Adapter, Hex x Square Drive, 7/16 x 3/8 in Male Drive, Male x Male Adapter, ASME B107.113, High Carbon Alloy Steel
Apex® A-314 Socket and Ratchet Wrench Adapter, Hex x Square Drive, 7/16 x 3/8 in Male Drive, Male x Male Adapter, ASME B107.113, High Carbon Alloy Steel
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 2 pole QO circuit breaker is rated at 50A at 120/240VAC. This unit provides 10kA breaking capacity and plug in mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
Hougen® Rotabroach® 3-12224 12000 Annular Cutter, 3/4 in Dia Cutter, 3 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Milwaukee® 49-59-2144 Annular Cutter, 1-7/16 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
