5094-18-07-TAN HALLOWELL SHELVING/METAL PRODUCTS
POSTS/PANELS-HLW50941807TAN>
Recently Viewed
POSTS/PANELS-HLW50941807TAN>
Dichtomatik N70137 O-Ring, 137 Dash Number, 2.05 in ID x 2.256 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
50-LBS #6013-5/32" WELDING RODS E6013 mild steel "General Purpose" is an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work, etc.
BBI 451030 Partially Threaded Cap Screw, 1-1/4-7, 4 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451030 Partially Threaded Cap Screw, 1-1/4-7, 4 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 440492 Partially Threaded Hex Bolt, 5/8-11, 2-1/4 in L Under Head, L9 Grade, Alloy Steel, Zinc Yellow CR+3
BBI 440492 Partially Threaded Hex Bolt, 5/8-11, 2-1/4 in L Under Head, L9 Grade, Alloy Steel, Zinc Yellow CR+3
Crosby® 1043677 G-291 Eye Bolt With Regular Nut, 3/4 in, 15 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043677 G-291 Eye Bolt With Regular Nut, 3/4 in, 15 in L Shank, Forged Steel, Hot Dipped Galvanized
