S-249-3/8 CROSBY 3/8" CLEVIS LINKS
Working Load Limit (WLL): 6,600 lbs (3.3 tons) Material: Forged and heat-treated carbon steel body with quenched and tempered alloy steel pins Design Factor: 4:1 ultimate strength (ultimate load is 4 times the WLL) Chain Compatibility: Approved for use with Grade 3, Grade 4, and Grade 7 (Transport) chains
Recently Viewed
Working Load Limit (WLL): 6,600 lbs (3.3 tons) Material: Forged and heat-treated carbon steel body with quenched and tempered alloy steel pins Design Factor: 4:1 ultimate strength (ultimate load is 4 times the WLL) Chain Compatibility: Approved for use with Grade 3, Grade 4, and Grade 7 (Transport) chains
OIL RESISTANT , ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA104K>
The Klein 66145 Cold Chisel, 7/8-Inch, is made from heat-treated, high-carbon steel for necessary hardness and durability. It cuts, shapes, and removes metal. Since 1857, Klein Tools has manufactured the world's finest hand tools.
1" TRANSFER PUNCH-PDTKH50064 >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
"-PIXA115K >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA114K>
