Campbell® 6506031 Replacement Cam/Pad Kit, For Use With 3 ton GX Clamps
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418210082
-
Manufacturer Part Number6506031
-
CountryUSA|Canada
-
Suitable For Use With3 ton GX Clamps
- Contains all necessary parts for shackle replacement
- Note - Shackle kit is supplied pre-assembled for easier installation
- Note - The cam and pad should be replaced at the same time
- Note - The cam and pad should be replaced at the same time
-
UNSPSC24101600
-
Includes(1) Cam, (1) Pad, (1) Cam Pin, (1) Pad Pin, (1) T-Spring, (1) Rivet and (4) Sel-Locs
-
Package DescriptionEACH
-
WarrantyLifetime Limited
-
Catalog
Recently Viewed
Campbell® 6506031 Replacement Cam/Pad Kit, For Use With 3 ton GX Clamps
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Hougen® Rotabroach® 3-12232 12000 Annular Cutter, 1 in Dia Cutter, 3 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Hougen® Rotabroach® 12228 12000 Annular Cutter, 7/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Leviton® GFTR2-E Duplex Feed Through Self-Test Slim Standard Tamper Resistant GFCI Receptacle With LED Indicator Light, Black Test, Reset Button, 125 V AC, 20 A, 2 Poles, 3 Wires, Black
Peace of mind, all the time. The SmartlockPro® self test GFCI tests itself even if you forget. Designed to meet the latest UL standard for auto-monitoring (self test) our complete line of self test GFCIs periodically conduct an automatic internal test to confirm that it can respond to a ground fault. With the slimmest profile ON the market, the device allows for fast and easy installation, while Leviton® patented reset lockout mechanism prevents reset of the GFCI if it is not wired or operating correctly. The SmartlockPro® self test GFCI is the smart choice in ground fault circuit interrupter protection.
Hougen® Rotabroach® 12220 12000 Annular Cutter, 5/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Campbell® 6506011 Replacement Cam/Pad Kit, For Use With 1 ton GX Clamps
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
