Walter Surface Technologies
Drillco 1" REAMERS DRL 428-A-164
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank
DRILLCO 1/2" NITRO SML STUBBY DRILLBITS DRL 300-N-132
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. Screw machine
Drillco 1/2" REAMER DRL 428-A-132
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank
Drillco 1/2" SOLID CARBIDE ENDMILLS DRL 735-A-132-C
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
DRILLCO 1/4" NITRO SML STUBBY DRILLBITS DRL 300-N-116
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. Screw machine
Drillco 1/4" SOLID CARBIDE ENDMILLS DRL 735-A-116-C
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 1/4" TO 1-3/8" MULTISTEP UNIBITS DRL 890-A-005
Drillco 890A005 8900 Multi-Step Drill Bit, 1/4 in Dia Min Hole, 1-3/8 in Dia Max Hole, 10 Steps, HSS, 10 Hole Sizes, 1/2 in Shank
Drillco 1/4" TO 3/4" 9-HOLE STEP UNIBITS DRL 890-A-003
Drillco 890A003 8900 Multi-Step Drill Bit, 1/4 in Dia Min Hole, 3/4 in Dia Max Hole, 9 Steps, HSS, 9 Hole Sizes, 3/8 in Shank
Drillco 1/8" 4-F SE SOLID CARBIDE ENDMILLS DRL 735-A-108-C
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
DRILLCO 1/8" NITRO SML STUBBY DRILLBITS DRL 300-N-108
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold. Screw machine
Drillco 1/8" TO 1/2" 13-HOLE STEP UNIBITS DRL 890-A-001
Drillco 890A001 8900 Multi-Step Drill Bit, 1/8 in Dia Min Hole, 1/2 in Dia Max Hole, 13 Steps, HSS, 13 Hole Sizes, 1/4 in Shank
Drillco 1000A143 Imperial Silver and Deming Drill, 43/64 in Drill - Fraction, 0.6719 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A144 Imperial Silver and Deming Drill, 11/16 in Drill - Fraction, 0.6875 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A145 Imperial Silver and Deming Drill, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A148 1000 Imperial Silver and Deming Drill, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A209 Imperial Silver and Deming Drill, 1-9/64 in Drill - Fraction, 1.1406 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A232 Imperial Silver and Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000A5 Silver and Deming Drill Set, 9/16 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 5 Pieces, HSS, Uncoated
1000 series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000C156 Imperial Silver and Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
1000C series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Cobalt steel for drilling harder materials.
Drillco 1000C164 Imperial Silver and Deming Drill, 1 in Drill - Fraction, 1 in Drill - Decimal Inch, 1/2 in Shank, Cobalt
1000C series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Cobalt steel for drilling harder materials.
Drillco 1000E219 Imperial Silver and Deming Drill, 1-19/64 in Drill - Fraction, 1.2969 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000E series S&D Drills expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000EF140 Imperial Silver and Deming Drill, 5/8 in Drill - Fraction, 0.625 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000EF157 Imperial Silver and Deming Drill, 57/64 in Drill - Fraction, 0.8906 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Drillco 1000EF162 Imperial Silver and Deming Drill, 31/32 in Drill - Fraction, 0.9688 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
Recently Viewed
#5 Spline x 1-1/2" Deep Budd | Poly Bag with Barcode | Weight: 2.85 lbs.
12" BLACK ADJUSTABLE WRENCH - ALL26112 >
33-MM #5 SPLINE DR I/SOCKETS POLY BAG WITH BARCODE, WEIGHT 1.75 LBS.
The Grey Pneumatic 1" Drive x 3/4" Deep Socket (4024D) is a high-performance tool crafted from high-quality alloy steel (chrome-molybdenum) for durability and reliability. Designed to withstand the high torque of impact tools, this socket is ideal for professional use and demanding applications.
KEY FEATURES AND BENEFITS:
Durable Construction: Made from high-quality alloy steel (chrome-molybdenum) for long-lasting performance.
Impact Resistant: Designed to withstand the high torque of impact tools.
Deep Socket Design: Ideal for reaching deep into nuts and bolts.
6-Point Design: Provides a secure grip on hexagonal fasteners.
SPECIFICATIONS:
Drive Size: 1"
Socket Size: 3/4"
Socket Depth: Deep
Material: Alloy Steel (Chrome-Molybdenum)
904MS is a 1/4-inch drive x 4mm standard-length surface drive impact socket. Crafted from durable chrome-molybdenum steel, it features a 6-point design engineered to transfer pressure away from the fastener's corners>
3/4" X 13" BLACK DIAMOND CORE BIT
