Walter Surface Technologies
DRILLCO 1000N145 Imperial Silver and Deming Drill, 45/64 in Drill - Fraction, 0.7031 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N147 Imperial Silver and Deming Drill, 47/64 in Drill - Fraction, 0.7344 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N148 Imperial Silver and Deming Drill, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N152 Imperial Silver and Deming Drill, 13/16 in Drill - Fraction, 0.8125 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N153 Imperial Silver and Deming Drill, 53/64 in Drill - Fraction, 0.8281 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N156 Imperial Silver and Deming Drill, 7/8 in Drill - Fraction, 0.875 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N160 Imperial Silver and Deming Drill, 15/16 in Drill - Fraction, 0.9375 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N163 Imperial Silver and Deming Drill, 63/64 in Drill - Fraction, 0.9844 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N164 Imperial Silver and Deming Drill, 1 in Drill - Fraction, 1 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
DRILLCO 1000N32 Silver and Deming Drill Set, 1/2 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 32 Pieces, HSS, Oxide Treated
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have a 1/2" shank, and are 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point.
DRILLCO 1035N132 Imperial Reduced Shank Drill, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 3/8 in Shank, HSS
Nitro® jobber drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for hand held or CNC Operations. Black & Gold. 3/8" Shank.
DRILLCO 115-PC NITRO DRILLBIT SETS DRL 400-N-0115
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
DRILLCO 125SF216 Safety First Construction Reamer, Imperial, 1-1/4 in Dia x 9-3/8 in L, 1-13/16 in Dia Hex Shank, Spiral Flute
Nitro Safety-First Heavy-Duty Construction Reamers have 2 neo-40 magnets embedded in their hex shanks. This reduces the likelihood of the reamer falling out of the impact socket when working overhead, increasing user safety. Black & Gold finish.
Drillco 1308A116 1308 Imperial Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 8 in OAL, HSS
For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.
Drillco 1308A122 Imperial Extra Length Drill, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 8 in OAL, HSS
For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.
Drillco 172F1168 1720 Imperial Masonry Drill, 1/4 in Drill Bit, SDS-Plus Shank, 6 in D Cutting, Carbide Cutting Edge, 8-1/2 in OAL
SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.
Drillco 172F14010 1720 Imperial Masonry Drill, 5/8 in Drill Bit, SDS-Plus Shank, 8 in D Cutting, Carbide Cutting Edge, 10-1/4 in OAL
SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.
Drillco 172F14012 1720 Imperial Masonry Drill, 5/8 in Drill Bit, SDS-Plus Shank, 10 in D Cutting, Carbide Cutting Edge, 12-1/4 in OAL
SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.
Drillco 172F14812 1720 Imperial Masonry Drill, 3/4 in Drill Bit, SDS-Plus Shank, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
SDS Plus. 4x90 head geometry prevents locking when hitting rebar on the side. Bit is designed for longer life when drilling in concrete. As an additional benefit, it can crush through and pulverize rebar when drilling in reinforced concrete applications.
Drillco 175F1127 1750 Screw Anchor Imperial Masonry Drill, 3/16 in Drill Bit, SDS-Plus Shank, 4-1/8 in D Cutting, Carbide Cutting Edge, 7 in OAL
Hex shaft for attachment to sleeve driver to drive tapcon® screws.
Drillco 2000A10 2000 Tap Set, Right Hand Cutting
Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use in production tapping or hand operations in a wide range of application material groups.
Drillco 2000AW5 Tap and Reamer Wrench, 5/32 to 1/2 in Tap, 11 in L, Bar Handle
Adjustable straight handle tap wrenches have one threaded handle which is attached to one of the clamps. The clamp is opened to insert the tool and then tightened down against the tool to secure it. Used with larger taps, reamers or screw extractors.
Drillco 200A101 Jobber Length Drill Bit, 1/64 in Drill - Fraction, 0.0156 in Drill - Decimal Inch, 118 deg Point, HSS, Oxide Treated
200/240/280 series drills are designed for general purpose drilling under a wide range of conditions. For low to medium tensile strength materials. The surface treatment prevents chip welding, improves chip flow and increases abrasion resistance.
Drillco 200LH21 Left Hand Cut Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Uncoated
200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand. They are also used in left hand screw machines. Can be used to drill out broken bolts.
Recently Viewed
Stanley® Surform® 21-293 Standard Cut Replacement Flat Blade, For Use With 21-296 Plane and 21-295 Flat File Regular Cut Blade, Steel
Stanley® Surform® 21-293 Standard Cut Replacement Flat Blade, For Use With 21-296 Plane and 21-295 Flat File Regular Cut Blade, Steel
9-PC EXTRACTOR SET-IRW52490>
RIDGID® 45050 Pin, For Use With: Model 711/911/815A Self-Opening Through-Head-Oiling Die Head
RIDGID® 45050 Pin, For Use With: Model 711/911/815A Self-Opening Through-Head-Oiling Die Head
Hyde® 42358 Utility Blade With Dispenser, Snap-Off, Sharp Point, Compatible With Hyde® 42032, 42035, 42036, 42040, 42045 and Most Other Knives Requiring 9 mm Blades
Proto® TorquePlus™ J5232H Standard Length Socket, Imperial, 3/8 in Square Drive, 1 in
2"-MPT X 3/4"-FPT THREADED STEEL REDUCING BUSHING - APLRB20075>
