Southwire Company

Topaz's 4" x 4" x 2" PVC products are strong and long lasting; precisely fabricated for optimal safety during installations. Our Schedule 40 PVC Junction Box is a surface mounted enclosure, designed without entrance hubs, to allow multiple conduit connections and wire splices made within. See product spec sheet for more details.

Topaz's 3/8” NM Clamp Connectors are designed for use in dry locations to bond nonmetallic sheathed cable to boxes or enclosures. Naturally corrosion resistant zinc die cast construction with two screw assembly to assure a secure connection. Long lasting and dependable fabrication; 1/2” size for cable from 2 # 14-2 with ground and 2 # 12-2 with ground. UL listed.

Topaz's Schedule 40 PVC LR Type Conduit Bodies and Junction Boxes can be glued or solvent welded to PVC electrical conduit pipe to create a wire connection point. Removable cover is included with zinc plated screws and a waterproof gasket. Available in sizes from 1/2” to 4”, LR type conduit bodies permit 90° right bends in conduit systems, provide easy access for splicing and can correct and change direction of conduit runs.

Topaz's Schedule 40 PVC LR Type Conduit Bodies and Junction Boxes can be glued or solvent welded to PVC electrical conduit pipe to create a wire connection point. Removable cover is included with zinc plated screws and a waterproof gasket. Available in sizes from 1/2” to 4”, LR type conduit bodies permit 90° right bends in conduit systems, provide easy access for splicing and can correct and change direction of conduit runs.

Available in sizes from 1/2” to 4”,Topaz's Schedule 40 PVC LB Type Conduit Bodies permit 90° back turns in conduit systems, provide easy access for splicing and can correct and change direction of conduit runs. Lightweight, noncorrosive and nonconductive PVC construction enables easy installation in small areas. Removable cover with zinc plated screws; UL approved and always ready for fast delivery.

Suitable for underground use,Topaz's Schedule 40 PVC Reducers are designed to fit into a bell end or female fitting to enable a reduction that accommodates conduit sized one diameter smaller. Flush style bushing in durable PVC construction; cULus approved in sizes from 3/4” X 1/2” to 4” X 3-1/2.”

Topaz's Schedule 40 PVC Two Piece Expansion Couplings compensate for temperature-related length changes in exposed applications. Two piece, rugged and noncorrosive construction with lubricated seals provides easier movement; manufactured with a male terminator adapter end design. For use with both Schedule 40 and Schedule 80 PVC conduit; cULus approved in sizes from 1/2” to 4.”

Topaz's Schedule 40 PVC Two Piece Expansion Couplings compensate for temperature-related length changes in exposed applications. Two piece, rugged and noncorrosive construction with lubricated seals provides easier movement; manufactured with a male terminator adapter end design. For use with both Schedule 40 and Schedule 80 PVC conduit; cULus approved in sizes from 1/2” to 4.”

Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 45° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”

Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 90° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”

Marketed under the SIGNAL® brand name, Coleman Cable manufacturers one of the most comprehensive security, home technology and datacom cable packages available today. Our product offering provides cable solutions for virtually every security and home technology application. Coleman Cable technical expertise and commitment to innovation ensure the most advanced and highest quality security, home technology and datacom cable in the market.

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Often referred to as utility boxes, Southwire - Topaz drawn handy boxes are used for switch boxes and are a great option for with machinery and appliances. Available in multiple KO sizes with or without concentric KOs and raised ground emboss with installed 10/32 grounding screw where noted. cULus listed and RoHS compliant.

With a wide range of sizes and styles, Madison has the flex and liquidtight conduit that you need. From trade sizes ranging from 3/8 to 4 in, no job is too big or too small. Made from the highest quality steel, aluminum and PVC, Madison's flex and liquidtight conduit come through each and every time.

Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.

Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.

Two-piece strut clamps are used to mount 1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.

Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.

Garvin Industries four hole single channel Post Bases are manufactured using zinc plated steel, have a 6 in by 6 in base, are 1/4 in THK and have (4) mounting holes.

Garvin Industries flat four hole tee plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.

Garvin Industries flat four hole corner plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.

3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.

1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.

3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.