Pearl Abrasive
2-1/2" X 1" 180-GRIT FLAPWHEEL-PEAFL212180 >
2-1/2" X 1" 120-GRIT FLAPWHEEL-PEAFL212120 >
18" X .125X1" DIAMOND BLADE-PEALW1812CP >
12X.125X1" STANDARD DIAMOND ASPHALT-PEALW1212AGS >
12" X .125" X 20-MM DIAMOND BLADE-PEALW1212CS2 >
12" X .125" X 1" DIAMOND BLADE - PEAPV1212XL >
1" X 3/4" X 1/4" 80-GRIT FLAPWHEEL-PEAFL13480 >
1" X 3/4" X 1/4" 60-GRIT FLAPWHEEL-PEAFL13460 >
1" X 3/4" X 1/4" 180-GRIT FLAPWHEEL-PEAFL134180 >
1" X 3/4" X 1/4" 120-GRIT FLAPWHEEL-PEAFL134120 >
1" X 1" X 1/4" 120-GRIT FLAPWHEEL-PEAFL110120 >
1-1/8" X 21" 60-GRIT SANDING BELT-PEACB11860 >
1-1/8" X 21" 40-GRIT SANDING BELT-PEACB11840 >
Recently Viewed
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING. -PIXB115K>
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB222K>
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA134K>
13 TOOTH DOUBLE SPROCKETS FOR #40 CHAIN-BRWD40B13 >
1/16" X 36" RED RUBBER (FT)-TEAR7502X36 >
