NSi Industries
Remke Tuff-Sealâ„¢ 7303-008R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.22 to 0.32 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke Tuff-Sealâ„¢ 7303-005R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.7 to 0.97 in Cable, For Use With 1 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke Tuff-Sealâ„¢ 7303-004R Non-Insulated Wide Range Strain Relief Grip With Mesh, 3/4 in Trade, 0.52 to 0.73 in Cable Openings, Aluminum
Tuff-Sealâ„¢ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
Remke Tuff-Sealâ„¢ 7303-003R Non-Insulated Wide Range Strain Relief Grip With Mesh, 1/2 in Trade, 0.4 to 0.54 in Cable Openings, Aluminum
Tuff-Sealâ„¢ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
Remke Tuff-Sealâ„¢ 7303-002R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.3 to 0.43 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke Tuff-Sealâ„¢ 7303-001R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.22 to 0.32 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Remke Tuff-Sealâ„¢ 2201-015R Closed Mesh Single Eye Single Weave Standard Support Grip, 1020 lb Breaking Strength, 0.75 to 0.99 in Cable, Bronze, TiN Coated
Remke Tuff-Sealâ„¢ 2201-015R Closed Mesh Single Eye Single Weave Standard Support Grip, 1020 lb Breaking Strength, 0.75 to 0.99 in Cable, Bronze, TiN Coated
Remke Tuff-Sealâ„¢ 2201-013R Single Eye Single Weave Closed Mesh Standard Duty Wire Mesh Cable Grip, 530 lb Breaking Strength, 0.5 to 0.62 in Cable, Bronze, TiN Coated
Tuff-Sealâ„¢ Support Grips are designed to hold the weight of cable that is vertical or sloping. Support grips serve an important function; electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in power failure. Tuff-Sealâ„¢ Support Grips are woven with non-magnetic, tinned bronze wire that absorbs strain and flexing while resisting cable pull-out, flexing and vibration. These grips are available in a variety of eye styles and cable ranges, can be used either indoors or outdoors and will support cable, metal rods and tubing with loads up to 600 lb.
Remke 7303-011R Insulated Wide Range Strain Relief Grip, 0.52 to 0.73 in Cable Openings, Steel
Tuff-Sealâ„¢ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
Duro Dyne® 820018 Heavy Duty Snip
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut or right/straight cut.
Duro Dyne® 820007 Snip, Straight Cut Snip
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut, right/straight cut, and straight cut.
Duro Dyne® 820004 Snip, Right Cut Snip
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut, right/straight cut, and straight cut.
Duro Dyne® 820001 Snip, Left Cut Snip
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut, right/straight cut, and straight cut.
Recently Viewed
5-40" X 1/2" USS Socket Head Capscrew
400-WATT METAL HALIDE BULBS-BULMVR400U >
3/8" X 3-1/2" SAE SOCKET HEAD CAPSCREW-NBS7020380350 >
ALUMINUM NOZZLE FOR 75LJ SERIES GUN - GUA75LJNA1 >
HCI Preferred Supplier 55046 Pipe Elbow, Steel, 3/8 in, FNPT
1-1/4" -NATIONAL PIPE THREAD RESTRICTED PORT BALL VALVE-FTG11/4BBV >
