Morse Cutting Tools
MORSE® 90734 5943G Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, TiN Coated
MORSE® 90732 5943G Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, TiN Coated
MARXMANâ„¢ 80236 330 General Purpose Jobber Length Drill Bit, #36 Drill - Wire, 0.1065 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMANâ„¢ 80236 330 General Purpose Jobber Length Drill Bit, #36 Drill - Wire, 0.1065 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMANâ„¢ 83401 597 General Purpose Carbide Burr, Radius End, Tree Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut
MARXMANâ„¢ 83401 597 General Purpose Carbide Burr, Radius End, Tree Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut
MORSE® 22588 1680 Taper Pin Reamer, #1 Taper Pin, 0.1447 in Dia Small End, Straight Flute, Straight Shank
MORSE® 29929 1655H Chucking Reamer, 1.002 in Dia x 10-1/2 in OAL, 0.874 in Dia Straight Shank, Straight Flute
MORSE® 59609 5970 Premium Carbide Burr, Radius End, Taper Head, 5/8 in Dia Head, 1-3/16 in L of Cut, Double Cut
variFLUTEâ„¢ 56290 5986 Center Cutting High Performance Single End Stub Length End Mill, 1/4 in Dia Cutter, 0.015 to 0.02 in Corner Radius, 3/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2 in OAL, AlTiN Coated
MORSE® 32469 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 56108 5752 Countersink, 3/8 in Dia Body, 1/4 in Dia Shank, 1 Flutes, 82 deg Included, Carbide
MORSE® 91160 5942T Ball Nose Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiALN Coated
MORSE® 59926 5970 Long Shank Carbide Burr, Flat End, Cylindrical Head, 3/8 in Dia Head, 3/4 in L of Cut, 6-3/4 in OAL, Double Cut
MORSE® 33031 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 3/8-24 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
ShearTapâ„¢ 34405 2090 Spiral Point Tap, Right Hand Cutting, #6-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTapâ„¢ 34422 2090 Spiral Point Tap, Right Hand Cutting, 5/16-18 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTapâ„¢ 34440 2090 Spiral Point Tap, Right Hand Cutting, 5/8-11 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTapâ„¢ 34430 2090 Spiral Point Tap, Right Hand Cutting, 7/16-14 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
MARXMANâ„¢ 85046 330QI General Purpose Jobber Length Drill Bit, S Drill - Letter, 0.348 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 59066 5989 Regular Length Single End Drill Mill, 5/16 in Dia, 90 deg Point, 2 Flutes, 13/16 in L Flute, 13/16 in L of Cut, 5/16 in Dia Shank, 2-1/2 in OAL, Bright
MORSE® 22110 1655 Chucking Reamer, 1/16 in Dia x 2-1/2 in OAL, 0.0585 in Dia Straight Shank, Straight Flute
MORSE® 29102 1655H Chucking Reamer, 0.0895 in Dia x 3 in OAL, 0.081 in Dia Straight Shank, Straight Flute
MORSE® 22123 1655 Chucking Reamer, 3/32 in Dia x 3 in OAL, 0.088 in Dia Straight Shank, Straight Flute
MORSE® 29147 1655H Chucking Reamer, 0.117 in Dia x 3-1/2 in OAL, 0.112 in Dia Straight Shank, Straight Flute
MORSE® 22354 1655M Chucking Reamer, 0.1181 in Dia, 3-1/2 in OAL, 0.112 in Straight Shank, Straight Flute
Recently Viewed
Selkirk® by Duravent Ultra-Temp® 206490 Platinum™ Insulated Attic Shield
IDEAL® Aqua-Gel® CW 31-298 Cable Pulling Lubricant, 1 qt Squeeze Bottle, Gel Form, Pink, 1.1
IDEAL Aqua-Gel CW non-toxic cable pulling lubricant features the same excellent qualities as IDEAL Aqua-Gel II, but with a lower temperature range for exterior use in cold weather conditions. It is polymer-based formula with a clear orange color that offers maximum tension reduction in high-stress electrical and communications cable-pulling operations. Clings to cable throughout long pulls and is well-suited for hand or poured applications. Lubricant dries to a semi-fluid film that won't clog conduit, and cleans up easily with soap/water. It remains temperature stable over a wide temperature range from-28°F to 190°F (-33°C to 88°C). It is acceptable with all cable types except composite rubber, and clings to cable throughout long pulls. It comes in a 1-quart squeeze bottle, 1-gallon bucket, and 5-gallon bucket. It is environmentally safe, non-toxic, non-flammable and non-corrosive for convenient use. For outdoor use only.
Apex® AM-05-35 Socket Driver Bit, 1/4 in Hex Drive, 3/32 in
10-MM X 25-MM FLAT HEAD SOCKET HEAD CAPSCREW-MET799110025 >
10-32" HEX RETHREAD DIE-DRI33E010F >
