MORSE C-Tool #6-32 SPIRAL POINT SHEARTAP MCT 34405
ShearTap™ 34405 2090 Spiral Point Tap, Right Hand Cutting, #6-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, Black Steam Oxide Over Nitride, HSS
-
BrandShearTap™
-
UPC686125344054
-
Manufacturer Part Number34405
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide Over Nitride
-
Thread Length3/8 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationSteels and Stainless Steels up to 35Rc Hardness
-
Thread Size#6-32
-
Thread StandardUNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
Series2090
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Overall Length2 in
- ShearTap™ offers exceptional value for high volume tapping
- The geometry is optimized for long chipping steels and stainless steels up to a hardness of 35Rc
- Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- Plug style (3 to 5 thread chamfer) is the most common chamfer used for tapping applications in through holes and blind holes with sufficient bottom clearance
- CNC reduced neck design enhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling
- Also reduces contact between the tap and the workpiece
- Steam oxide over nitride features a hard abrasive resistant nitride base for enhanced tool life in abrasive materials including cast iron
- Steam oxide surface treatment reduces friction, loading and galling, helps retain cutting fluids, improves thread quality and extends tool life
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 34405 2090 Spiral Point Tap, Right Hand Cutting, #6-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, Black Steam Oxide Over Nitride, HSS
40 FT 300 LB TYPE-1-A FIBERGLASS EXTENSION LADDER -WER75402 >
22 TOOTH SPROCKETS FOR #41 CHAIN-BRW41H22 >
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
48" X 48" 7000-LB CAPACITY FORMED ALUMINUM DOCKPLATE - VESFA74848>
Proto® J86A7/8X18S2 Extra Long Cold Chisel, 1 in S2 Tool Steel, 18 in OAL, 1 in W Blade
