Morse Cutting Tools
MORSE® 20209 773 Screw Extractor, #9 Extractor, 1-1/16 in Drill, For Screw Size: 1-3/4 to 2-1/8 in, 4-5/8 in OAL
MORSE® 52782 5913 Ball Nose Center Cutting Regular Length Single End End Mill, 0.032 in Dia Cutter, 0.096 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 22676 1697 Bridge Reamer, 1-1/16 in Dia x 12 in L, #3 Morse Taper Shank, Straight Flute
MORSE® 10068 1302 General Purpose Taper Shank Drill Bit, 1-1/16 in Drill - Fraction, 1.0625 in Drill - Decimal Inch, #3 Morse Taper Shank Taper, HSS
MORSE® 19065 1424S Silver & Deming Drill, 1-1/16 in Drill - Fraction, 1.0625 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE® 44440 4586 Center Cutting Regular Length Single End End Mill, 1-1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1-1/4 in Dia Shank, 4-1/2 in OAL, Bright
MORSE® 25634 1752 Countersink, 1-1/2 in Dia Body, 3/4 in Dia Shank, 1 Flutes, 82 deg Included, HSS
MORSE® 30514 1179 Die Stock
MORSE® 22252 1655 Chucking Reamer, 1-1/2 in Dia x 12-1/2 in OAL, 1.249 in Dia Straight Shank, Straight Flute
MORSE® 10096 1302 General Purpose Taper Shank Drill Bit, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, #4 Morse Taper Shank Taper, HSS
Amboreâ„¢ 19075 1424S Silver & Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
MARXMANâ„¢ 80089 424R Silver & Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE® 43558 1897 Non-Center Cutting Regular Length Single End End Mill, 1-1/2 in Dia Cutter, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, Bright
MORSE® 44470 4593 Center Cutting Regular Length Single End Roughing End Mill, 1-1/2 in Dia Cutter, 2-1/4 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4-1/2 in OAL, Bright
MORSE® 36130 2119 Pipe Tap, 1-1/2-11-1/2 Thread
MORSE® 32492 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-12 Thread, H4 Thread Limit, Plug Chamfer, 6 Flutes, Bright, HSS
MORSE® 32333 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-12 Thread, H4 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
MORSE® 32669 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-12 Thread, H4 Thread Limit, Bottoming Chamfer, 6 Flutes, Bright, HSS
MORSE® 31331 1266 Hex Rethreading Die, 1-1/2-12 UNF Thread, 1 in THK, Carbon Steel
MORSE® 32668 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-6 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE® 32491 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-6 Thread, H4 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 32332 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-6 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32730 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
MORSE® 38161 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M16x1.5 Thread, D6 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Recently Viewed
3" X 36-YD WHITE AISLE MARKING TAPE-UTCUT00W3 >
1-GAL MOP ON RESTORER-ML-FC14361GAL>
Milwaukee® 48-25-1752 Standard Self-Feed Bit, 1-3/4 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
GP® 3046D Deep Length Socket, 3/4 in, 1-7/16 in Hex Socket, 6 Points
7/8" -ID JAW COUPLING HALVES-BRWL100X7/8 >
1/2" X 54" WOOD AUGERS-GRN38073>
