Morse Cutting Tools
MORSE® 22388 1655M Chucking Reamer, 20 mm Dia x 9 in OAL, 0.624 in Dia Straight Shank, Straight Flute
Onyx 30931 2101M General Purpose Spiral Point Tap, Right Hand Cutting, M20x1.5 Thread, D6 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 38126 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x1.5 Thread, D6 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE® 38026 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x1.5 Thread, D6 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 38165 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x1.5 Thread, D6 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
ShearTapâ„¢ 35281 2090M Oversized Spiral Point Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Plug Chamfer, 4 Flutes, Black Steam Oxide Over Nitride, HSS
MORSE® 38515 7501 General Purpose Spiral Point Tap, M20x2.5 Thread, D7 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
MORSE® 38166 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 31347 1266M Hex Rethreading Die, M20x2.5 Thread, 7/8 in THK, Carbon Steel
MORSE® 33605 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #2-56 Thread, H2 Thread Limit, Tapered Chamfer, 3 Flutes, Bright, HSS
MORSE® 38115 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE® 38015 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 58032 5944 Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 31575 2195M Adjustable Round Split Threading Die, M20x2.5 Thread, 1/2 in THK, 1-1/2 in OD Die, HSS
MORSE® 37105 8001 Tap and Drill Set, 20 Pieces, M3x0.5 to M12x1.75 Tap Thread, #40 to 17/64 in Drill, Plug Tap Chamfer
MORSE® 37103 8001 Tap and Drill Set, 20 Pieces, #4-40 to 1/2-13 Tap Thread, #44 to 27/64 in Drill, UNC Thread, Plug Tap Chamfer
MORSE® 18100 8030 General Purpose Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Black Oxide
MORSE® 10042 1302 General Purpose Taper Shank Drill Bit, 21/32 in Drill - Fraction, 0.6562 in Drill - Decimal Inch, #2 Morse Taper Shank Taper, HSS
MORSE® 11498 1330 General Purpose Jobber Length Drill Bit, 21/32 in Drill - Fraction, 0.6562 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 19040 1424S Silver & Deming Drill, 21/32 in Drill - Fraction, 0.6562 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE® 57921 5943 Center Cutting Regular Length Single End Mill, 21/64 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Bright
Amboreâ„¢ 12079 1384 Heavy Duty Jobber Length Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
MORSE® 17195 2330 1-Stage Type J Heavy Duty Jobber Length Aircraft Drill, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 135 deg Point, Cobalt
MORSE® 11467 1330 General Purpose Jobber Length Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Recently Viewed
Browning® Classical Gripbelt® 1042613 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 9-3/4 in OD, 9.2 in (A)/9.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042613 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 9-3/4 in OD, 9.2 in (A)/9.7 in (B) Dia Pitch, 7/8 in W Face
QUICK AND EASY ASSEMBLY. POSITIVE SEALS, EASY ON/OFF HOSE CONNECTIONS, 360 DEGREE ORIENTATION MAXIMUM PRESSURE IS 150 PSI
- BAJM100MPT >
PIX BX-73 IS A COGGED, CLASSICAL V-BELT 76" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX73 >
1-5/8" 14-GA S/STEEL UNISTRUT (FT)-BLNB24S/S4>
1-2 P.S.I. spring.
300 P.S.I. maximum.
316 stainless steel springs.
EPDM gasket.
Glass reinforced polypropylene.
One piece construction.
V-10200 BANJO a replacement bearing ring, essential O-rings, and heavy-duty valve seats.
Components included: The package contains a replacement bearing ring, essential O-rings, and heavy-duty valve seats. Seal Material: Features high-grade FKM (Viton-type) seals optimized for excellent resistance to heat, oils, and agricultural chemicals. Seat Material: Utilizes self-lubricating PTFE (Teflon) seats designed to prevent the ball mechanism from sticking or binding. Weight: Super lightweight at exactly 0.12 lbs.
