Morse Cutting Tools
MORSE® 15178 1436 General Purpose Screw Machine Drill, E Drill - Letter, 0.25 in Drill - Decimal Inch, HSS, Bright
MORSE® 51100 5374 Standard Length Jobber Length Drill Bit, E Drill - Letter, 0.25 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 14519 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, E Drill - Letter, 0.25 in Drill - Decimal Inch, 135 deg Point, HSS
MORSE® 28015 4202S Square Tool Bit, M2 HSS, 1/4 in H x 1/4 in W Shank, 2-1/2 in OAL
MORSE® 10566 1314 General Purpose Taper Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 6-1/8 in OAL, HSS, Black Oxide
MARXMANâ„¢ 83421 597 General Purpose Carbide Burr, Pointed End, Cone Head, 1/4 in Dia Head, 1 in L of Cut, Double Cut
MORSE® 59733 5970 General Purpose Premium Carbide Burr, Ball Head, 1/4 in Dia Head, 7/32 in L of Cut, 2 in OAL, Single Cut
MORSE® 59540 5970 Premium Cup Brush, Radius End, Cylindrical Head, 1/4 in Dia Head, 5/8 in L of Cut, 2 in OAL, Double Cut
MORSE® 16713 1391 Aircraft Extension Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 135 deg Point, HSS
MORSE® 10931 1315 Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 12 in OAL, HSS
MORSE® 43416 1896 Center Cutting Double End Regular Length End Mill, 1/4 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
MORSE® 10928 1315 Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 8 in OAL, HSS
MORSE® 36144 2119 Dryseal Pipe Tap, 1/4-18 Thread
MORSE® 36163 2123 Straight Flute Pipe Tap, 1/4-18 Thread
MORSE® 31158 1195 Adjustable Round Split Threading Die, 1/4-20 UNC Thread, 1/4 in THK, 13/16 in OD Die, Carbon Steel
MORSE® 60850 2095C High Performance Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 61239 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
ShearTapâ„¢ 94550 2090G Oversized Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H7 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
ShearTapâ„¢ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTapâ„¢ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
ShearTapâ„¢ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTapâ„¢ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
MORSE® 30609 2089 High Performance Spiral Flute Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Black Steam Oxide, HSS-PM
ShearTapâ„¢ 34417 2090 Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
MORSE® 36311 2105 Straight Flute Forming Tap, 1/4-20 Thread, H6 Thread Limit
MORSE® 31538 2195 Adjustable Round Split Threading Die, 1/4-20 UNC Thread, 1/2 in THK, 1-1/2 in OD Die, HSS
Recently Viewed
Bore Diameter (Inner): 45 mm Outside Diameter: 120 mm Overall Width: 29 mm Contact Angle: 40° (Optimized for managing large, single-direction axial forces)Cage Material: Machined Solid Brass (Indicated by the "M" suffix, offering excellent wear resistance under rapid acceleration)Basic Dynamic Load Rating: 85.2 kN Basic Static Load Rating: 55 kN Limiting/Reference Speed: 7,500 RPM Sealing Configuration: Open type (Requires external lubrication, often factory paired with MT47 grease or run open in oil-bath setups)
SWIVEL EYE BLOCK PULLEY-BLK03548>
3-7/8" -IDX4-1/8" -OD O-RING
PIX 3-VX-335/04 3VX SECTION WEDGE COGGED V-BELT; 3/8" X 33.5" OUTSIDE LENGTH, 4 BANDS
THE 3VX335/04 BANDED V-BELT IS INTERCHANGEABLE WITH 4/3VX335, 4-3VX335, 4R3VS335 & 4GB3VX335. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. GENERATES HIGHER HP RATINGS. NO WHIP, SLIPPPAGE OR JUMP OFF UNDER HEAVY SHOCK LOADS. BETTER FLEXIBILITY ON SMALLER DIAMETER PULLEYS, ENHANCED HEAT DISSIPATION RATE
-PIX3VX335/04 >
10-MM 12-PT FULL POLISH METRIC SHORT COMBINATION WRENCH
LEAF ROLLER CHAIN (FT)-RENBL544>
