ShearTap™ 34466 2091 Oversized Spiral Flute Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Black Steam Oxide, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125344665
-
Manufacturer Part Number34466
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide
-
Thread Length0.433 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationSteels and Stainless Steels
-
Thread Size1/4-20
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH3
-
Measurement SystemImperial
-
TypeOversized
-
Series2091
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-1/2 in
- Steam oxide over nitride resists chip welding, increases lubricity and helps to retain cutting fluid
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
ShearTap™ 34466 2091 Oversized Spiral Flute Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Black Steam Oxide, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
GEARWRENCH® 9107 Open End Regular Length Combination Wrench, 7 mm Wrench, 12 Points, 0/15 deg Offset, 5.236 in OAL, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
MORSE® 32407 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE® 32407 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
1/4"-ID X 100 FPT LENGTH AIR HOSE. 1/4" MPT NON-SWIVEL FITTING ON EACH END. RED COLOR.
-JAS1/4X100>
United Abrasives-SAIT Saitlam F™ 73940 Close High Performance Coated Abrasive Flap Disc, 4-1/2 in Dia, 7/8 in Center Hole, 40 Grit, Coarse Grade, Zirconia Alumina Abrasive, Type 29 Conical Disc
United Abrasives-SAIT Saitlam F™ 73940 Close High Performance Coated Abrasive Flap Disc, 4-1/2 in Dia, 7/8 in Center Hole, 40 Grit, Coarse Grade, Zirconia Alumina Abrasive, Type 29 Conical Disc
WHITE RIGHT-END ALUMINUM GUTTER CAP - JWH103004 >
