Morse Cutting Tools
MORSE® 33052 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 3/4-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
MORSE® 32718 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
MORSE® 32473 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-16 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MARXMANâ„¢ 86306 110QI Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
MORSE® 32655 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-16 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
ShearTapâ„¢ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTapâ„¢ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
MORSE® 61269 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 3/4-16 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 36166 2123 Straight Flute Pipe Tap, 3/4-14 Thread
MORSE® 32319 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32653 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE® 31207 1195 Adjustable Round Split Threading Die, 3/4-10 UNC Thread, 5/8 in THK, 2 in OD Die, Carbon Steel
MORSE® 33048 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
MORSE® 31317 1266 Hex Rethreading Die, 3/4-10 UNC Thread, 3/4 in THK, Carbon Steel
MORSE® 32717 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
MORSE® 33454 2020 General Purpose Straight Flute Hand Tap, Left Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
ShearTapâ„¢ 34444 2090 Spiral Point Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTapâ„¢ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTapâ„¢ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
MORSE® 44143 4550 Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, Bright
MORSE® 44206 4552 Center Cutting Extra Long Length Single End End Mill, 3/4 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6-1/4 in OAL, Bright
MARXMANâ„¢ 86125 385QI 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, #49 Drill - Wire, 0.073 in Drill - Decimal Inch, 135 deg Point, HSS
MORSE® 58947 5967 Center Cutting High Performance Regular Length Single End End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL, Bright
MORSE® 44258 4553 Center Cutting Double End Regular Length End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Bright
MORSE® 10303 1315 Extra Length Drill, 3/4 in Drill - Fraction, 0.75 in Drill - Decimal Inch, 12 in OAL, HSS
MORSE® 59549 5970 Premium Cut-Off Wheel, Radius End, Cylindrical Head, 3/4 in Dia Head, 3/4 in L of Cut, 2-1/2 in OAL, Double Cut
Recently Viewed
DOUBLE-V V-BELT OUTSIDE CIRCUMFERENCE 152-PIXC148 >
1/8" X 36" BLACK NEOPRENE(FT)-TEAN6004X36 >
812-W CHANNELLOCK 12" CHROME ADJUSTABLE WRENCHES
The CHANNELLOCK® 812W 12" Wide Adjustable Wrench has a greater jaw capacity to support larger nuts and bolts with thinner, non-protruding jaws for greater access in tight spaces. The combination of a smart and comfortable tapered handle design, precise 4-thread knurl and minimal head width improves performance in everyday use. CHANNELLOCK® Adjustable Wrenches are made in Spain and forged from rugged chrome vanadium steel.
WIDE jaws offer up to 25% extra capacity, supporting larger nuts and bolts
LONGER jaws grip better and provide greater access in tight spaces
MEASUREMENT SCALES are laser engraved (in. on front, mm. on reverse) and are handy for sizing nuts, pipe and tube diameters
PRECISE 4-thread knurl improves adjustment accuracy
OPTIMAL head width and non-protruding jaws allow accessibility for hard to reach applications
RUGGED Chrome Vanadium steel construction
CHROME finish for ultimate rust prevention
Product Dimensions: 12" x 0.75" x 0.75"
3/16" X 4" STRAIGHT SHANK IG MASONRY BITS
THESE BELTS FOLLOW A CLASSICAL V-BELT PROFILE, WHICH ENSURES COMPATIBILITY WITH A VARIETY OF STANDARD PULLEY SYSTEMS. THE WRAPPED CONSTRUCTION PRVIDES ENHANCED PROTECTION AGAINST ENVIRONMENTAL FACTORS. THEY ARE MADE OF RUBBER COMPOUNDS AND STRONG TENSION MEMBERS. THEY ARE RESISTANT TO HEAT AND OIL AND STATIC.
-PIXC142>
189" V-BELT - PIXC185>
