Milwaukee Tool
Milwaukee® 48-20-5025 Thin Wall Core Bit, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee® 48-20-5020 Thin Wall Core Bit, 1-3/8 in Drill - Fraction, 1.375 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee® 48-20-5015 Heavy Duty Thin Wall Core Bit, 1-1/4 in Drill - Fraction, 1.25 in Drill - Decimal Inch
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee® 48-20-5010 Thin Wall Core Bit, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete.
Milwaukee® 48-20-5005 Heavy Duty Thin Wall Core Bit, 1 in Drill - Fraction, 1 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee® 48-20-4419 4-Cutter Rotary Hammer Drill Bit, 2 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
Milwaukee® 48-20-4418 4-Cutter Rotary Hammer Drill Bit, 1-3/4 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4405 4-Cutter Rotary Hammer Drill Bit, 1-1/4 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4395 4-Cutter Rotary Hammer Drill Bit, 1-1/4 in Drill Bit, 3/4 in Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
Four cutter Spline bits have a series of 13 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
Milwaukee® 48-20-4390 4-Cutter Rotary Hammer Drill Bit, 1-1/8 in Drill Bit, 3/4 in Spline Shank, 17 in D Cutting, Carbide Cutting Edge, 22 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4385 4-Cutter Rotary Hammer Drill Bit, 1-1/8 in Drill Bit, 3/4 in Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4380 4-Cutter Rotary Hammer Drill Bit, 1 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4375 E Series 4-Cutter Rotary Hammer Drill Bit, 1 in Drill Bit, 3/4 in Spline Shank, 17 in D Cutting, Carbide Cutting Edge, 22 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4370 4-Cutter Rotary Hammer Drill Bit, 1 in Drill Bit, 3/4 in Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4350 4-Cutter Rotary Hammer Drill Bit, 3/4 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4345 4-Cutter Rotary Hammer Drill Bit, 3/4 in Drill Bit, 3/4 in Spline Shank, 22 in D Cutting, Carbide Cutting Edge, 27 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4340 4-Cutter Rotary Hammer Drill Bit, 3/4 in Drill Bit, 3/4 in Spline Shank, 17 in D Cutting, Carbide Cutting Edge, 22 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4335 4-Cutter Rotary Hammer Drill Bit, 3/4 in Drill Bit, 3/4 in Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4320 4-Cutter Rotary Hammer Drill Bit, 5/8 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4305 4-Cutter Rotary Hammer Drill Bit, 5/8 in Drill Bit, 3/4 in Spline Shank, 11 in D Cutting, Carbide Cutting Edge, 16 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4300 4-Cutter Rotary Hammer Drill Bit, 5/8 in Drill Bit, 3/4 in Spline Shank, 5 in D Cutting, Carbide Cutting Edge, 10 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters (also available in metric from 16 mm to 38 mm).
Milwaukee® 48-20-4056 2-Cutter Rotary Hammer Drill Bit, 9/16 in Drill Bit, 3/4 in Spline Shank, 4 in D Cutting, Carbide Cutting Edge, 10 in OAL
Milwaukee®'s Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee® 48-20-4054 2-Cutter Rotary Hammer Drill Bit, 1/2 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee's Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee® 48-20-4052 2-Cutter Rotary Hammer Drill Bit, 1/2 in Drill Bit, 3/4 in Spline Shank, 16 in D Cutting, Carbide Cutting Edge, 22 in OAL
Two cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 in. to 1-1/2 in. diameters as well as metric diameters. One per package.
Recently Viewed
16-RIB POLY-V V-BELT - PIX230J16>
Allows 5-1/2 in. for right angle drill head and chuck. Provides two additional drilling speeds. Chuck transferred from drill to low spindle of right angle unit reduces drills normal speed by 1/3 and increases drilling torque by 50%. Chuck transferred to opposite spindle of right angle unit increases speed by 50%.
1-3/4" -ID TAPER-LOCK BUSHING-BRW3030X13/4 >
5-GAL JOHN DEERE TRANSMISSION, HYDRAULIC FLUID-CAT16825GAL >
5/8" 2F, SE ENDMILL-BASB90097>
3/16" 4-FL, SE ENDMILL-BASB90101>
