Milwaukee Tool
Milwaukee® 48-22-2606 Screwdriver Set, 6 Pieces, Plastic/Steel, Polished Chrome
Milwaukee precision screwdrivers feature an all-metal core for up to 4X strength. Precision machined tips provide secure fitments and long life. The extended reach design and longer shanks deliver improved visibility and reach. 360-degree rotating back caps offer greater control, driving ability, and tuning. Additionally, color coded markings allow users to easily ID tools on the jobsite. Chrome plated shanks increase tool life by reducing corrosion and providing superior rust protection.
Milwaukee® 48-22-2417 Nut Driver Set, 5 to 13 mm, 7 Pieces, 7-1/4 in OAL, Cushion Grip Handle, Steel, Polished Chrome
Milwaukee® 7 pc. Metric hollow shaft nut drivers feature universal driver heads which fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee® 48-22-2322 9-in-1 General Purpose Ratcheting Multi-Bit Screwdriver, 9 Pieces, Phillips®/Slotted/Square Point, Ergonomic Grip Handle, Steel
Milwaukee 9IN1 ratcheting multi-bit drivers feature 3-1/2 in. power groove bits for power tool compatibility and maximum jobsite versatility. The chrome plated bits provide marine-grade rust protection and reduce wear from the elements on the job. The all metal high torque ratchet allows for 2X faster driving without sacrificing control. Milwaukee 9IN1 multi-bit drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee® 48-22-2241 Screwdriver, #1 ECX® Point, Steel Shank, Plastic/Rubber Handle, ASTM F1505-10
Milwaukee® 1000V insulated screwdrivers are the only UL® classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards and meet the OSHA insulated tool requirement. Providing an uncompromising safety rating, Milwaukee insulated screwdrivers are flame retardant and impact resistant and feature a dual layer insulation for maximum protection and a visual wear indicator to issue a replacement warning to the user. Milwaukee insulated screwdrivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee® 48-22-2187 L-Key Set, 22 Pieces, Steel
The MILWAUKEE® 2PC Kit includes a 13-key SAE and a 9PC Metric L-Style Hex Key Set with Ball Ends that features the easiest access keys on the market. The pivoting holder with offset keys makes it quick and easy to grab the necessary size key. The allen keys withstand more torque and extend the life of the tool in the toughest jobsite conditions. The holder and keys have long-lasting, high-contrast markings for quick size identification. With a ball end, the keys are able to easily access fasteners even when at a difficult angle. The pivoting holder with a hang hole makes transportation and storage simple. The Milwaukee® 2PC Kit L-Style Hex Key Set with Ball Ends is backed by their Limited Lifetime Warranty.
Milwaukee® 48-22-1926 Full Tang Tradesman Fixed Blade Knife, Stainless Steel, 1/2 in W
The Milwaukee® tradesman fixed blade knife is designed for optimal edge retention and durability. The stainless steel blade is engineered to stay sharper longer. A full metal tang provides durability for tough cuts. The durable molded sheath provides easy carry and storage.
Milwaukee® 48-22-1921 Insulation Knife, Smooth Blade, Stainless Steel Blade, 12 in OAL
The Milwaukee® straight edge insulation knife is designed for optimal edge retention and durability. The stainless steel blade is engineered to stay sharper up to 2X longer when cutting mechanical and HVAC insulation. A full metal tang provides durability for tough cuts and the rounded handle allows for smoothing tapes and adhesive laps. Includes a durable blade cover for storage.
Milwaukee® 48-22-0428 Compact Tape, Steel Blade, Graduations 1-1/16 in
The MILWAUKEE® 25ft Magnetic Tape Measure w/ Rechargeable 100L Light provides the brightest and clearest measuring in the industry. The LED on this tape measure delivers 100 lumens, providing bright and clear lighting for dimly lit job sites. Featuring an impact-resistant lens & frame, and an IP54-rated lens, our LED Tape Measure is constructed to withstand harsh jobsite conditions. This LED Tape is USB rechargeable and delivers up to 2.5 hours of continuous runtime. The finger stop protects from blade retraction and provides greater control of measurements. The tape delivers 15' of Reach and 12’ of Standout, allowing you to take long measurements on your own and reach further on the jobsite.
Milwaukee® 48-22-0335 Compact Magnetic Wide Measuring Tape With Belt Clip, 35 ft L x 1 in W Blade, Steel Blade, 1/16 in Graduation
The MILWAUKEE® 35ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee® 48-22-0325 Compact Magnetic Wide Measuring Tape, 25 ft L x 1 in W Blade, Steel Blade, 1/16 in, 1/8 in, 1/4 in, 1/2 in, 1 ft Graduation
The MILWAUKEE® 25ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6” of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee® 48-22-0316 Compact Magnetic Wide Measuring Tape With Belt Clip, 16 ft L x 1 in W Blade, Steel Blade, 1/16 in, 1/8 in, 1/4 in, 1/2 in, 1 ft Graduation
The MILWAUKEE® 16ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee® 48-22-0240 Magnetic Wide Measuring Tape With Belt Clip, 40 ft L x 1-5/16 in W Blade, Steel Blade, 1/16 in, 1/8 in Graduation
The MILWAUKEE® 40ft Wide Blade Tape Measures have the longest, straightest standout and up to 17' of reach* to take long measurements. The straightest standout* makes it easier to measure long distances alone by reducing blade arc. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional coating on the first 6 in of the blade, reducing tape tear. The measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee® 48-22-0216 Magnetic Wide Measuring Tape With Belt Clip, 16 ft L x 1-5/16 in W Blade, Steel Blade, 1/16 in, 1/8 in, 1/4 in, 1/2 in, 1 ft Graduation
The MILWAUKEE® 16ft Wide Blade Tape Measures have the longest, straightest standout and up to 16' of reach* to take long measurements. The straightest standout* makes it easier to measure long distances alone by reducing blade arc. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional coating on the first 6 in of the blade, reducing tape tear. The measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Milwaukee® 48-22-0125 Compact Magnetic Measuring Tape, 25 ft L x 1-1/16 in W Blade, Steel Blade, 1/16 in Graduation
Our compact magnetic tape measures have up to 9 ft of standout and a magnet that easily adheres to EMT and steel studs for ease of use. Built with our nylon bond blade protection and a 5-point reinforced frame, these measuring tapes are wear and impact-resistant. For increased productivity on the job site, the tape measures feature double sided printing with blue print scale allowing you to easily read and transfer measurements. The magnetic tip tape measures also feature a finger stop, which protects your finger and gives control during blade retraction.
Milwaukee® 48-20-9097 SHOCKWAVE Multi-Material Drill Bits, 1/4 in Shank Hex Shank, 4 in D Cutting
The MILWAUKEE® Concrete Screw Installation Kit provides a durable and versatile solution for fast installation of concrete screws. This complete drive system is designed for concrete screw drilling AND driving applications, giving users the ability to use only one tool for the job – resulting in increased productivity and fewer bit swaps. The SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits use sharpened carbide to deliver up to 9X longer life in concrete and up to 4X faster drilling into masonry materials. These bits are engineered with a built-in hex collar for perfect hole depths every time. The included magnetic, SHOCKWAVE™ Impact Duty Concrete Screw Nut Drivers bear a recessed shoulder feature, which prevents concrete screws from snapping during installation and ensures the anchor is set to the perfect depth. The Drill/Drive sleeve connects to the drill bits and driver bits for quick and easy anchor installations without the need to carry two tools and extra bits. Optimized for performance in any impact driver, drill/driver, and hammer drill. Packaged in a medium, single-sided hard case designed for use in the Milwaukee® PACKOUT™ Storage System.
Milwaukee® 48-20-9057 SHOCKWAVE™ Masonry Single Ended Drill Bit Set, 5/32 in Min Drill Bit, 3/8 in Max Drill Bit, 7 Pieces, For Use With Hammer Drill Drivers, Carbide
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.
Milwaukee® 48-20-9045 SHOCKWAVE™ Single Ended Hammer Drill Bit, 3/4 in Drill Bit, 3/8 in 3-Flat Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 3-Flat Secure Grip™ shank, Milwaukee® Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with hammer drills/drivers. Available in diameters up to 1 inch.
Milwaukee® 48-20-9040 SHOCKWAVE™ Single Ended Hammer Drill Bit, 5/8 in Drill Bit, 3/8 in 3-Flat Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 3-Flat Secure Grip™ shank, Milwaukee® Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with hammer drills/drivers. Available in diameters up to 1 inch.
Milwaukee® 48-20-9011 SHOCKWAVE™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.
Milwaukee® 48-20-9010 SHOCKWAVE™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 2 in D Cutting, Carbide Cutting Edge, 4 in OAL
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.
Milwaukee® 48-20-8892 SHOCKWAVE™ General Purpose Multi-Material Jobber Length Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 4 in D Cutting
The MILWAUKEE® 1/2" SHOCKWAVE™ Impact Duty Carbide Multi-Material Drill Bits are the most versatile bits, designed to tackle a variety of materials, including brick, block, concrete, steel, aluminum, ceramic tile, backerboard, wood, PVC, and drywall. The aggressive multi-grind carbide tip delivers up to 10x longer life in stacked materials and up to 85% faster drilling speeds in metal. Equipped with a 1/4" hex shank, these general-purpose drill bits are compatible with impacts, drill/drivers, and hammer drills. These Milwaukee® drill bits provide the ideal all-in-one solution for the widest variety of materials, tools, and applications.
Milwaukee® 48-20-8083 M/2™ 2-Cutter Rotary Hammer Drill Bit, 18 mm Drill Bit, Spear Cutting, 3/8 in SDS-Plus Shank, 400 mm D Cutting, Carbide Cutting Edge, 450 mm OAL
Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee® 48-20-8056 M/2™ 2-Cutter Rotary Hammer Drill Bit, 12 mm Drill Bit, Spear Cutting, 3/8 in SDS-Plus Shank, 110 mm D Cutting, Carbide Cutting Edge, 160 mm OAL
Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee® 48-20-8051 M/2™ 2-Cutter Rotary Hammer Drill Bit, 10 mm Drill Bit, Spear Cutting, 3/8 in SDS-Plus Shank, 250 mm D Cutting, Carbide Cutting Edge, 310 mm OAL
Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Recently Viewed
NOTCHED GRIP V-BELTS-BRW5VX450>
