Milwaukee Tool

The M12 FUEL™ extended reach ratchets are Milwaukee's latest addition to their best-in-class lineup of ratchets. These ratchets provide industry leading torque output with a slim head profile and an extended neck that give users the longest reach in tight spaces. Investment cast steel yoke housing and the POWERSTATE™ brushless motor deliver the superior durability that users expect from Milwaukee. The M12 FUEL™ extended reach ratchets are the ideal addition to any technician's tool chest; allowing users to get to stubborn, hard to reach fasteners without the concern of knuckle busting, while providing the same best-in-class torque output as our M12 FUEL™ ratchets.

The Milwaukee 49-16-2556 tool boot is for use with Milwaukee M12 FUEL™ 1/4 in. ratchet (2556-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

The M12 FUEL™ 1/4 in. Hex impact driver once again raises the bar for 12 V performance with best in class driving speed, power, and size. By focusing on productivity, this impact driver gets the job done faster by being over 20% faster in application speed vs. the competition. This tool outputs over 1,300 in-lbs of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1 in. in length allows for unmatched access in tight spaces. The POWERSTATE brushless motor delivers up to 0-3, 300 RPM with constant power output to drive screws faster. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12 REDLITHIUM compact batteries or extended capacity batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-mode drive control provides greater control over output speed and power for greater versatility by delivering 0-1, 300 RPM in mode 1, 0-2, 400 RPM in mode 2 and 0-3, 300 RPM in mode 3. Mode 4 is self-tapping screw mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

12-V CORDLESS BARE TOOL CLAMP METER-MWK223920>

The MILWAUKEE® ANSI/ISEA 105-2016 Cut Level 3 Nitrile Dipped Gloves are designed to be more durable and provide better protection. These gloves feature a reinforced nitrile coating between the thumb and index finger for added durability in high-wear areas and are constructed with a 15-gauge knit for better dexterity when handling small objects. Additionally, these cut-resistant gloves have a sandy nitrile finish for better grip and durability. SMARTSWIPE™ fingertips & palms provide full access to touchscreen devices without removing the gloves. MILWAUKEE® Nitrile Dipped Gloves feature a color-coded wristband and back-of-hand logo for easy cut level identification.

The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. The POWERSTATE™ Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack that delivers 25% more power, runs 25% cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.

The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. Leveraging POWERSTATE™ Brushless Motor, The Stubby Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This Milwaukee® solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.

The MILWAUKEE® M12 FUEL™ 3/8" Extended Reach Ratchets are the latest addition to the best-in-class lineup of battery powered ratchets. The M12 FUEL™ ratchets provide industry leading torque output with a slim head profile and an extended neck for the longest reach in tight spaces. The long handle ratchet features an Investment Cast Steel Yoke housing and a POWERSTATE™ Brushless Motor that deliver superior durability users expect from Milwaukee. The long reach electric ratchets are the ideal addition to any tool chest to get to stubborn, hard to reach fasteners without the concern of knuckle busting, The 3/8" cordless ratchet provides the performance of a pneumatic ratchet with up to 40 ft-lbs max torque, the same torque output as the M12 FUEL™ Ratchets.

The MILWAUKEE® M12 FUEL™ 3/8" Right Angle Impact Wrench w/ Friction Ring Kit is the industry's most powerful right angle impact wrench. This battery-powered right angle impact wrench delivers up to 220 ft-lbs. of nut-busting torque without kickback to remove stubborn bolts and fasteners. This durable cordless impact wrench easily fits into tighter spaces than traditional pistol-grip impact wrenches with a profile head of only 2.2 inches, reducing the user's need for socket extensions. The 4-Mode Drive Control delivers unmatched control in various fastening and bolt removal applications. Milwaukee REDLINK PLUS™ Intelligence provides maximum performance and protection against overloads, over-heating, and over-discharge. The M12™ REDLITHIUM™ Battery Packs are compatible with all M12™ tools, delivering more work per charge and more work over the life of the pack.

The MILWAUKEE® M12 FUEL™ 1/4" Straight Die Grinder Kit is designed to replace pneumatic die grinders. The die grinder delivers up to .3 HP performance to outperform pneumatic die grinders by 20%. The M12™ inline die grinder has 3-Mode RPM control and a responsive variable-speed trigger providing unmatched control with most common accessories. The cordless die grinder provides greater access and mobility, eliminating the frustrations of hoses and compressors. This kit includes two M12™ REDLITHIUM™ 2.0 batteries.

The Milwaukee 49-16-2558 tool boot is for use with Milwaukee M12 FUEL™ 1/2 in. ratchet (2558-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.

The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.

Make a thinner cut through material and drill holes up to 3X faster with the Milwaukee® 11/16 in. one-piece Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating tooth form geometry to cut holes fast in steel, stainless steel and cast iron that's up to 1/2 in. thick. The milled 3-flat shank is designed to fit into 1/2 in. chucks. Milwaukee's most popular specialty steel drilling accessory, the one-piece Steel Hawg cutter is often used to cut a hole 1/16 in. larger than a bolt. It can be used with most electromagnetic drill presses and fits most 1/2 in. chucks.

Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.

Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.

9-GAL STEEL VACUUM CLEANERS-MWK8911>

The MILWAUKEE® M18 FUEL™ ANGLER™ 100' Non-Conductive Polyester Pulling Fish Tape Replacement Cartridge is part of the world's first battery powered fish tape solution. The steel fish tape puller features AUTO-RUN™ Powered Feed and Retract that eliminates manual operation for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The non-conductive fish tape puller has high flexibility, thicker polyester tape for easier fishing with a triple strand design to prevent kinking. The electrical fish tape with a plastic tip provides a fully non-conductive solution for maximum jobsite safety. This ANGLER™ has the ability to pull wire through a 100' run with 360° degrees of bends and is compatible with any of Milwaukee's 3 Less Binding steel and non-conductive Replacement Cartridges to tackle any situation.

Milwaukee® Torque Lock™ locking tools provide faster tool setup and more locking force for the professional tradesmen. The patent pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole design. Featuring hardened jaws for increased gripping power and forged alloy steel for maximum durability, the Milwaukee 48-22-3402 is perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all locking tools. The Milwaukee 48-22-3402 includes (1) 48-22-3410 10 in. Torque Lock™ curved jaw locking pliers with durable grip and (1) 48-22-3407 7 in. Torque Lock™ curved jaw locking pliers with durable grip.

Drop forged of high grade steel, this hammer iron is used by utility companies to bury grounding rods in the soil. Internal diameter of the ground rod driver and capacity of the hammer determine the size of ground rod able to be installed. One per package.

The MILWAUKEE® M18 FUEL™ QUIK-LOK™ 10" Pole Saw Attachment is powered by the M18 FUEL™ Power Head w/ QUIK-LOK™ and is compatible with the M18 FUEL™ QUIK-LOK™ Attachment System. The unit has a split shaft design and features a 10" OREGON® bar and chain which delivers smooth and fast cuts with minimal kickback. The pole saw attachment has an automatic oiler for proper chain lubrication, easy access chain tensioner for quick adjustments to chain tension, and a branch hook for added cutting leverage and branch removal. The QUIK-LOK™ Attachments have protected drive shafts for increased durability against drops and storage elements. The split boom pole saw attachment also utilizes optimized gearing to manage the cordless M18 FUEL™ Power Head RPM output specifically for cutting applications.

Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round hex, 3/4 hex, and 1-1/8 collared hex with notch). The Milwaukee 48-62-4091 is a 9-3/4 in. SDS Max demo ground rod driver. This demolition steel hammer accessory is ideally used with Milwaukee SDS Max demolition hammer 5446-21 and 5339 - 21. made from forged high grade steel, this hammer iron is used by utility companies to bury grounding rods in the soil. Internal diameter of the ground rod driver and capacity of the hammer determine the size of ground rod able to be installed.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. This chisel is specifically designed for SDS Plus rotary hammers and should be used in hammer only mode.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. The SDS Plus 5/8 in. x 10 in. ground rod driver is an ideal solution for driving common ground rods for electrical circuits into soft soil. Designed to drive 1/2 in. and 5/8 in. diameter temporary and permanent ground rods, the SDS Plus ground rod driver is a great tool for residential and commercial grounding applications. The SDS Plus shank allows the ground rod driver to be used in SDS Plus tools, providing an alternative to manual ground rod driving methods. The SDS Plus ground rod driver is designed to work hammer only mode.

The MILWAUKEE® 10" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain is designed to provide controlled, low-vibration cuts. The chamfer chisel tooth shape means less re-sharpening vs a full-chisel cutter. The narrow kerf, LOW PROFILE™ cutters offer more cuts per charge versus standard kerf to help maximize battery efficiency. This chain is recommended for use with the M18 FUEL™ 10" Pole Saw w/ QUIK-LOK™ (2825-20PS), M18 FUEL™ QUIK-LOK™ 10" Pole Saw Attachment (49-16-2720), and 10" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar (48-09-5001) and fits saws & narrow kerf bars of the same pitch, gauge, length, and drive links.