Milwaukee Tool

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.

Two cutter spline bits have a series of 12 spline that slide into an equal but opposite set of spline in the drive system of the spline drive hammer. This positive engagement of spline to spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 in. to 1-1/2 in. diameters as well as metric diameters. One per package.

3/4" X .014 X 1/4"-SHANK KNOT END WIRE BRUSH - MWK48521030 >

Milwaukee® diamond coring bits - "Dymobits" are designed to optimize drilling performance over a broad range of applications. We define drilling performance as the best balance of speed, life and overall drilling costs. State-of-the-art manufacturing techniques and the latest diamond matrix technology result in a complete line of bits to meet your most demanding requirements.

3/4" X .014 X 1/4"-SHANK CRIMPED WIRE END BRUSH - MWK48521010 >

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee via their website.

The tool man's dream, the super hole shooter has the most hand held power available. From turning the largest bits into steel, to powering grain augers or other equipment requiring portable power, the super hole shooter line of drills can handle it. The 1854-1 drill features 350 RPM with a 3/4 in. capacity chuck. This is the standard to which all other drills are compared.

Milwaukee® 49-92-0500 Straight Grinding Wheel, 3 in Dia x 1/2 in THK, 3/8 in Center Hole, 36 Grit, Aluminum Oxide Abrasive

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

Milwaukee® 49-90-0730 Round Replacement Dust Brush, For Use With 14471 1-1/2 in ID Hose, 3 in Dia

3" HINGED FACE PLATE WHEEL GUARDS-MWK49120280>

3" DIAMOND CONCRETE CORE BITS-MWK48163014 >

3" DIAMOND CONCRETE CORE BITS-MWK48163013 >

3" DIAMOND CONCRETE CORE BITS-MWK48163007>

3" CARBON WIRE CUP BRUSHES-MWK48521135 >

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Get professional-grade performance with the Milwaukee® 3 in. 12 TPI high-carbon steel t-shank jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for clean scroll cutting in wood. The T-shank allows for quick installation. Use with Milwaukee jig saw models 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands.

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.

Power, durability and upto 2X the runtime of 18 V cordless drills. The M28™ cordless Lithium-Ion right angle drill is designed for boring large holes between studs or joists and in other tight spaces. The rugged Milwaukee® built motor and gear train can handle the toughest plumbing and electrical applications. It's powered by the revolutionary M28™ Lithium-Ion battery, which provides upto 2X more runtime than 18 V batteries the head swivels 360 deg and can be locked tight in any position to optimize versatility on the jobsite this right angle drill features a 1/2 in keyed chuck that's coated to prevent rusting. The forward/reverse lever is conveniently located for easy reach. Use the drill's side handle to increase your leverage and control. The drill comes with an M28™ battery, an M28™ battery charger and durable carrying case.

The Milwaukee® 0719 cordless Lithium-Ion M28™ SAWZALL® reciprocating saw uses a high powered Milwaukee® built motor to deliver faster cutting and performance. Powering the 0719 is the revolutionary 28 V Lithium-Ion battery pack, exclusively from Milwaukee®. The 28 V battery pack delivers two times the runtime as most 18 V products, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge cutting capabilities. This SAWZALL® saw has a 1-1/8 in L stroke that delivers speed. The variable speed trigger delivers 2 levels of speed range 0 to 2000 SPM for metal cutting and other hard materials and 0 to 3000 SPM for cutting in wood and other materials encountered. The gear protecting clutch protects the tool against impact, delivering on the legendary SAWZALL® durability. The keyless shoe adjustment allows for better control in cutting and longer blade life. The QUIK-LOK™ blade clamp makes changing blades a snap. A comfortable non-slip soft-grip handle provides a better gripping surface and reduces vibration and operator fatigue.

Get high torque, maximum speed and upto 2X the runtime of 18 V cordless drills. With 750 in-lb of torque and upto 1800 rpm, the M28™ cordless Lithium-Ion 1/2 in hammer drill is ideal for drilling larger holes and driving larger screws faster. It's powered by the revolutionary M28™ Lithium-Ion battery (sold separately), which provides upto 2X more runtime than 18 V batteries this hammer drill features a 1/2 in all metal, single sleeve chuck with carbide jaws for maximum grip strength on bits in high torque applications. The non-slip, soft-grip handle reduces vibration for comfort and less fatigue during prolonged use. Use the drill's side handle to increase your leverage and control. The drill comes with a #2 Phillips bit.