Milwaukee Tool

This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

This set offers a variety of driver bits for everyday use as well as rare applications. Made of premium grade S2 tool steel, these bits are heavy duty, designed for hard use.

The MILWAUKEE® 40ft Wide Blade Tape Measures have the longest, straightest standout and up to 17' of reach* to take long measurements. The straightest standout* makes it easier to measure long distances alone by reducing blade arc. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional coating on the first 6 in of the blade, reducing tape tear. The measuring tapes are constructed with a 5-point reinforced frame for impact resistance.

This set offers a variety of driver bits for everyday use as well as rare applications. Made of premium grade S2 tool steel, these bits are heavy duty, designed for hard use. With magnetic nut drivers in the most popular sizes, those hard to reach areas are a thing of the past. This kit also includes Torx® bits in common sizes for automotive, appliance and electronics applications. Torx® is a registered trademark of acumen intellectual properties, LLC.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thick wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

4" CUP WHEEL GUARD ASSEMBLYS-MWK49120062>

4" CRIMPED WIRE WHEEL-MWK48521275 >

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Milwaukee® 49-93-5250 Cup Wheel, 4 in Dia, 16/24 Grit, Aluminum Oxide Abrasive

Get professional-grade performance with the Milwaukee® 4 in. 8 TPI high-carbon steel t-shank jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for very fast cutting in wood. The T-shank allows for quick installation. Use with Milwaukee jig saw models 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands.

Get professional-grade performance with the Milwaukee® 4 in. 8 TPI high-carbon steel u-shank jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for very fast cutting in wood. This blade features a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.

Get professional-grade performance and longer blade life with the Milwaukee® 4 in. 6 TPI bi-metal jig saw blade (5-Pack). These heavy-duty blades last longer than high-speed steel or carbon blades. With Milwaukee's attention to blade material, tooth shape and sharpness, the jig saw blades are ideal for very fast, clean cuts in wood. This blade has a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.

Get professional-grade performance with the Milwaukee® 4 in. 6 TPI high-carbon steel u-shank jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for very fast cutting in wood. This blade features a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.

4" DIAMOND CONCRETE CORE BITS-MWK48164014 >

With the introduction of the new M4™ 2-speed screwdriver, Milwaukee Tool commits to a new line of cordless products in the 4 V category utilizing the company's REDLITHIUM 2.0 battery technology. The new screwdriver incorporates the latest Milwaukee core technologies in motor, REDLITHIUM™ intelligence electronics and REDLITHIUM 2.0 batteries, increasing the tool's power and run-time, while shrinking its size. Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new screwdriver offers improved torque control during repetitive applications. Two speeds, 200 and 600 RPM, offer further user control for precision work. At only 244 millimeters in length and under one pound, the M4™ screwdriver is easy to use with one hand, featuring 1/4 in. quick-change chuck for one-handed bit changes.

Featuring hardened tips & forged shanks the Milwaukee® 4 piece cushion grip screwdriver set provides professional grade solutions and durability to the user. The wrench-ready bolster and precision knurling offers users the features needed to increase efficiency and effectiveness. The durable handles feature an anti-peel design.

4-1/2" X 5/8" -11 BACKING PAD-MWK49363455 >

For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6145 to a sander.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for digging clay, hard packed gravel, dirt (do not use for concrete). This chisel is specifically designed for SDS Max® rotary hammers and should be used in hammer only mode.

A tough and durable resin fibber sanding disc for the metal working industry. A versatile, all purpose disc of exceptional value because of its ability to perform in a wide range of applications. Ideal for rust and scale removal as well as light general purpose grinding.

The latest innovation in abrasive products, surface conditioning discs are tough non-woven nylon suited for conditioning metal, wood or plastic. The can be used to deburr, blend welds and clean surfaces. There web-like construction conforms to surface shapes and gets into corners and irregular surfaces where other discs can not. Disc changes are quick with the hook and loop backing attachment system.

This 4-1/2 in hook and loop (H and L) backing pad makes changing surface conditioning discs a breeze. Just peel them off, stick on a new one - quick and easy. This 4-1/2 in backing pad fits any 5/8-11 threaded spindle 10000 rpm sander grinder.

Milwaukee® 49-12-0320 Angle Grinder Wheel Guard, For Use With Milwaukee 6140 and 6145 with Serial Number a Thru D Angle Grinder, 4-1/2 in Angle