Milwaukee Tool

This Milwaukee hole saw arbor has a 7/16 in. hex shank for greater gripping capability in the chuck. It can be used in 1/2 in. capacity drills and larger. The arbor has a 1/2 - 20 thread and can be used on hole saws from 9/16 in. to 1-3/16 in.. it can be used with 49-56-8000, 49-56-8002 and 49-56-8005 pilot bits. Pilot bit 49-56-8000 is supplied with this arbor for use on wood and metal. One arbor and pilot per package.

The Milwaukee SHOCKWAVE™ lineman's 7/16 in. hex to 1/2 in. square adapter is the most durable adapter on the market and it's pin detent allows for better retention to the socket. The adapter features an optimized Shockzone™ that absorbs peak torque and prevents the adapter from breaking, providing up to 30X life. The adapter is made from Custom Alloy76™ steel, which maximizes it's resistance to wear and shock. The 7/16 in. hex shanks allows the adapter to lock into all 7/16 in. quick connect chucks.

Milwaukee® Carbide grit hole saws are designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile. Use a Carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.

The MILWAUKEE® SAE HOLLOWCORE™ Nut Drivers feature a HOLLOWCORE™ Shaft, which delivers unlimited depth in threaded rod and long bolt applications. The color-coded markings allow for easy size identification and the wrench-ready steel shanks provide additional leverage for tougher applications. Milwaukee® HOLLOWCORE™ Nut Drivers are backed by Milwaukee's Limited Lifetime Warranty.

Milwaukee® hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-9100 features a 7/16 in. hex shank, which can be used with any 7/16 in. extension. The 49-56-9100 also features a drive plate which is tightened up to the hole saw to eliminate wobble between the Arbor and hole saw.

The 6089-30 7 in/9 in 15 A Roto-Lok® large angle grinder with lock-on delivers performance and durability for the most difficult grinding jobs. The 15 A, 4.2 hp motor provides high overload protection and power for the toughest jobs. 9-position rotating main handle makes it easier to control the grinder in all orientations. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool. Both a 7 and 9 in type 27 grinding guard are included for greater productivity.

Exclusive Milwaukee® electronics provides speed control in this powerful 11 A polisher. A spindle lock provides convenient accessory changes. Self-stopping long life brush system minimizes down time. Milwaukee® exclusive QUIK-LOK™ cord provides instant field replacement for damaged cords. This polisher, when used with the foam pad accessories, is ideal for the clear coat finishes of today's cars. The combination is designed specifically to run cooler and reduce swirl marks.

Milwaukee® Torque lock MAXBITE™ locking tools deliver 3X gripping force and provide faster tool setup to the professional tradesmen. The patent pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole design. Featuring hardened jaws for increased gripping power and forged alloy steel for maximum durability, the Milwaukee 48-22-3707 and 48-22-3710 are perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all locking tools.

7" X 5/8" -11 SANDER BACKING PAD-MWK49363800 >

Milwaukee® 48-80-6000 Phenolic Disc, For Use With 7 in Standard Angle Grinders, 5/8-11 Thread, 7000 rpm

7" SANDER GUARDS-MWK49120100>

This 7 in. Wheel guard kit will supply all the necessary hardware required to change the type 27 wheel guard on previous Milwaukee grinder models 6072, 6078, 6065-6, 6066-6, 6068-6, 6096, and 6098. A hand screwdriver is required to assemble this guard to the tool. Use hub adapter 48-03-1000, disc nut 49-40-0380 and nylon washer when using type 27 depressed center wheels (without hub).

A tough and durable resin fibber sanding disc for the metal working industry. A versatile, all purpose disc of exceptional value because of its ability to perform in a wide range of applications. Ideal for rust and scale removal as well as light general purpose grinding.

7" DIAMOND CONCRETE CORE BIT - MWK48167006>

Milwaukee Torque Lock™ MAX BITE™ locking tools deliver 3X gripping force and provide faster tool setup to the professional tradesmen. The patent pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole design. Featuring hardened jaws for increased gripping power and forged alloy steel for maximum durability, the Milwaukee 48-22-3607 is perfect for the toughest of jobsites. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all locking tools.

The MILWAUKEE® 7PC Metric HollowCore™ Nut Driver set includes 5mm, 5.5mm, 6mm, 7mm, 8mm,10mm, and 13mm sizes. These nut drivers feature a HOLLOWCORE™ Shaft, which delivers unlimited depth in threaded rod and long bolt applications. The color-coded markings allow for easy size identification and the wrench-ready steel shanks provide additional leverage for tougher applications. Milwaukee® HOLLOWCORE™ Nut Drivers are backed by Milwaukee's Limited Lifetime Warranty.

The Milwaukee® 7-piece contractor's Selfeed bit kit is a complete assortment of the high-performance Milwaukee Selfeed drill bits you need on the jobsite. Milwaukee Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The dymobits improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. The kit includes Selfeed bits in diameters 1 in., 1-1/8 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2-1/8 in., and 2-9/16 in. in an impact resistant carrying case.

The MILWAUKEE® Concrete Screw Installation Kit provides a durable and versatile solution for fast installation of concrete screws. This complete drive system is designed for concrete screw drilling AND driving applications, giving users the ability to use only one tool for the job – resulting in increased productivity and fewer bit swaps. The SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits use sharpened carbide to deliver up to 9X longer life in concrete and up to 4X faster drilling into masonry materials. These bits are engineered with a built-in hex collar for perfect hole depths every time. The included magnetic, SHOCKWAVE™ Impact Duty Concrete Screw Nut Drivers bear a recessed shoulder feature, which prevents concrete screws from snapping during installation and ensures the anchor is set to the perfect depth. The Drill/Drive sleeve connects to the drill bits and driver bits for quick and easy anchor installations without the need to carry two tools and extra bits. Optimized for performance in any impact driver, drill/driver, and hammer drill. Packaged in a medium, single-sided hard case designed for use in the Milwaukee® PACKOUT™ Storage System.

The latest addition to Milwaukee® circular saw line features a patented adjustable main handle that provides users with maximum control and comfort. The handle position can be moved for the best ergonomic grip. Both front and rear handles have cushioned grips. A QUIK-LOK™ cord with a positive lock system, makes field replacement of the cord set easy and fast. A small button on the saw ensures positive lock. The power assisted brake stops the blade in seconds to repetitive cuts. At 10.6 lb and featuring a powerful Milwaukee® built 15 A motor, this saw provides the highest horsepower to weight ratio available in a 7-1/4 in saw. An aircraft aluminum shoe resists bending. Easy to reach depth and bevel adjustment knobs allow bevels to 50 deg.

The MILWAUKEE® 7-1/4" 56T Metal Circular Saw Blades are specifically designed to exceed contractor's expectations for blade life, cut quality, and speed in the most demanding metal cutting applications – without a lubricant. The metal cutting circular saw blades have hand-tensioned hardened alloy steel bodies. This extends blade life and delivers the highest quality cuts available. The blades have Carbide-Tipped Teeth with Alternate Top Bevel grind to shear through metal delivering burr-free, cool-to-touch cuts.

Endurance blades offer faster cutting and extra long life for contractors. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.

The MILWAUKEE® Thick Kerf Finish Circular Saw Blades offer the straightest cuts and clean finishes in wood. These blades are designed with a High Performance Thick Kerf and 40 teeth, providing you with the ability to achieve the straightest cut while maintaining a clean material finish. The diamond venting pattern enables cool cutting and improved chip ejection, while the cobalt-infused carbide teeth stay sharper for longer. The Thick Kerf Framing Blades are optimized for the most powerful cordless saws, providing strong performance even at the highest RPMs.

The MILWAUKEE® Thick Kerf Framing Circular Saw Blades offer the straightest cuts and longer life in wood. These blades are designed with a High Performance Thick Kerf, allowing you to get the straightest rip cuts and ultimate stability in softwoods, hardwoods, lumber, and laminated woods. The diamond venting pattern allows for cool cutting and improved chip ejection while the cobalt-infused carbide teeth stay sharper longer. These Thick Kerf Framing Blades are optimized for the most powerful cordless saws, providing strong performance even at the highest RPMs.

The TILT-LOK™ handle on Milwaukee® 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 lb and delivering 3.25 hp maximum, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 deg and offers superior visibility and a clear sight-line from either side. Helical steel gears and a 22 A switch are just two of the features that ensure the Milwaukee® reputation for durability.