Milton Industries

1/2 in FNPT G-style Couplers are used in applications that require over 60 scfm. There are two Milton® G-style Couplers, but both will function the same with G-style plugs. Milton® G-style Couplers are made of steel and are plated to resist rust. With a 1/2 in basic flow size, these plugs offer up to 99 scfm, making them the highest scfm rated Couplers. maximum pressure of 300 psi.

HCI Preferred Supplier 99825 Industrial Interchange Pipe Coupler, 1/2 in Nominal, MNPT, Steel

Milton® 1817 G Style Plug, 1/2 in, MNPT, Hardened Steel, Domestic

Milton® 1818 G Style Plug, 1/2 in, FNPT, Hardened Steel, Domestic

3/8 in MNPT G-style Plugs are made of case hardened steel and are plated to resist rust. G-style couplers and Plugs have a 1/2 in basic flow size and a maximum of 300 psi. Offering air flow of up to 99 scfm, Milton® G-style couplers and Plugs are perfect for applications that require over 60 scfm.

Milton® 1833 H Style Coupler With Buna-N Seal, 1/4 in, FNPT, Steel, Domestic

1/4 in MNPT H-style Couplers are used in larger tool applications requiring more scfm's. With their basic flow size of 3/8 in, H-style Couplers offer up to 300 psi. H-style Couplers are made of steel and are plated to resist rust. Complete with Buna-N seal.

Milton® 1835 H Style Coupler With Buna-N Seal, 3/8 in, FNPT, Steel, Domestic

3/8 in MNPT H-style Couplers are used in larger tool applications requiring more scfm's. 300 psi maximum. Complete with Buna-N Seal.

3/8 in MNPT H-style Plugs are made of case hardened steel and plated to resist rust. H-style Plugs have a basic air flow size of 3/8 in and a maximum inlet pressure of 300 psi. These Plugs are perfect for larger tool applications requiring more scfm.

1/4 in FNPT H-style Plugs are made of case hardened steel and plated to resist rust. H-style Plugs offer a basic flow size of 3/8 in and maximum pressure of 300 psi. Air flow of 67 scfm is perfect for all of your larger tool applications requiring more scfm.

Coilhose® 1203 Coilflow Manual Industrial Type 12 Manual Industrial Hose Connector, 1/2 x 3/8 in Nominal, Quick Connect Coupler x MNPT, 300 psi Pressure, Steel, Domestic

This 1/4 in FNPT filler faucet provides easy operation and smooth flow, providing a long spout and lever control. These filler faucets are heavy duty, ruggedly built with stainless steel springs. Made up of a zinc alloy body and a 4 in nitrile rubber filler spout, this faucet offers 30 to 35 psi.

This 3/4 in NPT Midsize High Pressure Heavy Duty Regulator is the relieving type, offering stable downstream air pressure over a wide range of air flows for accurate control, fast response and minimal pressure drop. Offset gauge ports can also serve as two 1/4 in NPT supply lines. Made up of an aluminum die cast body, balanced piston and molded rubber seat, this regulator should be proceeded by a filter to eliminate damage. Maximum of 250 psi and 220 scfm. Includes one plug for gauge port.

Nickel plated brass Valve Caps with long skirt are heavy knurled dome caps. These are high heat-resistant sealing washers.

Valve Core Tool is for the removal and insertion of valve cores. One end for is for a standard bore, while one end is for large bore valves. With an overall length of 5 in, this Valve Core Tool has a 3 in handle length.

4-in-1 Valve Repair Tool can be used for rethreading inside and outside of valve stems, insertion or removal of valve cores. Allows removal of valve cores even if shoulders are broken. This steel plated Valve Repair Tool has a tap size of 0.2108-36.

1-1/2 in plastic tire Valve Extension extends through hole in wheel cover for ease in inflating or checking tire pressure. Valve Extension is lightweight so it will not affect wheel balance.

Milton® is well known for inflator gauges. This dual head straight Chuck Inflator Gauge is made with heavy duty construction, providing for long life even under extreme use and conditions. Perfect for high pressure applications, this inflator gauge offers a pressure range of 10 to 160 psi. The dual heads allow for easy access into inner duals. Equipped with a magnified viewing window, this tire inflator gauge has a full swivel chuck and deflator valve. Gauge and valve cartridges are both replaceable. 1/4 in NPT air inlet. Meets OSHA regulation 1910.17.

Milton® is well known for inflator gauges. This inflator gauge is made with heavy duty construction which provides long life even under extreme use and conditions. Its single head air chuck comes with a chuck clip to quickly attach. Milton® inflator gauges come with both a magnifying window lens and a full swivel chuck. Has a pressure range of 10 to 160 psi in 2 lb increments. 1/4 in NPT air inlet.

Milton Industries specializes in Tire Inflator Gauges were the very first in the industry to offer replacement cartridges! Gauge and valve cartridges are both replaceable. This essential pneumatic tool is ideal for any vehicle trunk, home garage or automotive shop. Dual head chuck inflator gauge, where one of the heads is parallel to the extension. Both heads have the feature to lock onto the threads which enable the user to not have to hold the chuck while inflating. Made of heavy duty construction which provides for long life, even under extreme use and conditions. Equipped with magnifying lens for full view of scale. Full-swivel chuck.

5/16 in brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends have hose barbs.

Milton® (#690BK) 1/4 in FNPT dual head air Chuck Milton®'s S-690 dual head air Chuck allows easy access to inner dual when valve is facing inward. Sealing type Chuck is closed and is for use on an airline. Designed and manufactured to exacting standards, Milton® air Chucks have a maximum pressure of 150 psi. This air Chuck is not intended for use or compatible on all Milton® inflator gauges.

These 1/4 in FNPT straight head air Chucks are designed and manufactured to exacting standards. These closed or sealing type Chucks offer a maximum air pressure of 150 psi. These are not for use with an inflator/pressure gauge.