Malco Products

One-piece forged, I-beam construction. Full-polished heads with beveled face and pein are corrosion resistant. Hammer sections are individually hardened and tempered for strength and resiliency.

Malco Hand Seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3 in (76.2 mm) and 6 in (152.4 mm) jaw widths as well as an offset 3 in (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4 in (6.35 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 to 1-1/4 in (6.35-31.75 mm) deep in 24 gauge (0.71 mm) galvanized or (0.61 mm) mild steel. Malco's Hand Seamers, with forged steel jaws, also feature ergonomic Redline Handle technology. An Engineered handle opening compliments the natural power stroke of any user's hand and maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage. Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job.

The handle opening of Malco™ REDLINE gripped tools maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand. Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Easy one-hand-operation, including an easy open and close latch motion, always leaves a free hand to steady work piece.

Malco® MSHMLC1 Blue Magnetic Hex Chunk Driver, 5/16, 3/8 in Hex

This unique, exclusive, (U.S. Patent Pending), double-duty chuck driver ensures that popular 1/4-inch and 5/16-inch magnetic hex drives are always at hands reach. The dual-sided hex socket fits over a 1/4-inch magnet-tipped, ball-detent locking hex shaft and is quickly reversed for changing sizes. Tested torque of the socket and shaft is equal to comparable one-piece single size drivers to ensure optimum screw performance. The removable, reversible socket also allows easy access for cleaning the magnet tip to eliminate any troublesome buildup of metal shavings in the hex opening. Positive engagement of hex head fasteners is never compromised. The number MSHC Reversible Hex Chuck Driver is ideal for pairing with Malco Zip-in self-piercing or Bit-Tip drill and tap metal screws.

Use the Malco C5R Crimper to downsize stove pipe and round metal duct to create a male connection for joining sections. The five blades of this versatile job-site hand tool produce a 1-5/8 in (41.28 mm) long, shallow, double crimp that replicates factory indentations and ensures a tight fitting, leak-proof connection. The connection is also more self-supporting during installation. A handle closing stop maintains a consistent crimp. Hardened all-steel construction and a nickel chrome finish ensure long service life. The Malco C5R Crimper also features ergonomic Redline Handle technology. An Engineered handle opening compliments the natural power stroke of any user's hand and maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage. Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job.

The forged steel jaws of this left-cutting snip are set at a 90-degree angle to the handles to allow easy gripping when cutting sheet metal in tight spaces or overhead. The operator can follow tight circular or square pattern left cuts with either a pushing or pulling motion. A serrated edge on the upper jaw and compound head-to-handle linkage provide powerful, non-slip leverage for cutting up to 24-gauge (0.61 mm) cold rolled steel or 28-gauge (0.38 mm) stainless. Handles feature non-slip, cushion inserts, torsion-spring action and a squeeze-open, side operated latch. Rust-resistant polished forged steel jaws and black oxide finished handle stampings promote long service life.

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3-1/4 in (82.6 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field.