Klein Tools
Klein Tools 25"-LENGTH ELECTRICAL CABLE CUTTER KLE 63041
Klein Tools Standard Cable Cutters are lightweight, yet efficient. They feature replaceable hook-jaw blades that grab and hold cable while the shear-cutting action makes clean cuts. The jaws are made of forged tool steel with a black-oxide finish for long life. The exceptionally strong fiberglass handles have heavy vinyl grips for added comfort and slip resistance.
Klein Tools 26-PC IMPACT DRILLBIT SET W/CASE KLE 32799
Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut driversā hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.
Klein Tools 3-1/2" ALL STEEL SCRATH AWLS KLE 66385
Klein Tools Steel Scratch Awl scribes metal and starts screw holes. It also performs a variety of piercing and punching jobs. The one-piece forged-steel blade has a bolstered shank.
Klein Tools 3-BLADE POCKET KNIVES KLE 1550-9
3-BLADE POCKET KNIFE, CARBON STEEL SPEARPOINT, INSULATION-SLITTING, AND SCREWDRIVER TIP BLADES
Klein Tools 3-D-RING-MEDIUM FULL BODY HARNESS KLE 87090
KleinĀ® 87090 Heavy Duty Harness, M, 310 lb Load, Type 19 Nylon Strap, Tongue Leg Strap Buckle, D-Ring/Friction Slide Shoulder Strap Buckle
Klein Tools 3-D/RING MEDIUM FULL BODY HARNESS KLE 87080
KleinĀ® 87080 Heavy Duty Harness, M, Type 19 Nylon Strap, Tongue Leg Strap Buckle, Friction Slide Chest Strap Buckle, Friction Slide Shoulder Strap Buckle
Klein Tools 3-IN-1 IMPACT SOCKETS 3/4" & 9/16" KLE 66031
The 3-in-1 Slotted Impact Socket features an alignment slot to tighten and loosen most hot-line clamps. The single socket offers hands-free adjustment between the sizes needed for pole hardware installation and removal. Includes 3/4-Inch and 9/16-Inch hex sizes in a high torque, 12-Point design. Engineered to be used with an impact driver.
Klein Tools 3-MM X 6"-SHANK T-HANDLE HEX KEYS KLE 76303
KleinĀ® 76303 Hex Key, T-Handle Handle, Steel
Klein Tools 3-PC OFFSET BOX GEARWRENCH SETS KLE 68244
The Klein Tools 3-Piece Ratcheting Offset Box Wrench Set offers high-quality, drop-forged steel tools. Each wrench has a 25-degree offset for use in confined spaces. Offset and fully reversible with different sizes on each end.
Klein Tools 3-POCKET PLR/RULE/SD LINEMAN POUCH KLE 5118-PRS
This durable leather tool holder has 3 pockets for pliers, a folding rule and screwdriver. Two-way knife snap keeps your knife safe and secure. The holder is slotted to fit belts up to 2-Inch (51 mm) wide. Lightweight option for carrying the tools you need for the particular job you re doing today.
Klein Tools 3" SCREWDRIVER--USE "KLE" 6013-K
Screwdriver split-blade screw-holding driver wedges into screw slot
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places
Not designed for torquing or tightening
Made in USA for maximum strength and durability
Klein Tools 3" SLOTTED SCREW-HOLD SCREWDRIVERS KLE K-21
Split-blade screw-holding driver wedges into screw slot.
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places.
Not designed for torquing or tightening.
Precision blade for use with small precision screws. Blade thickness of .028'' (1 mm) expanding to .045'' (1 mm).
Has pocket clip.
Klein Tools 3"-LONG 3-IN-1 IMPACT FLIP SOCKETS KLE 32766
The 3-in-1 Impact Flip socket allows for quick switching between drive sizes. For use on an impact driver, this versatile socket includes three hex sizes: 5/16-Inch, 1/4-Inch shallow (driver) and 1/4-Inch deep (bit holder). Rare-Earth magnet holds bits and hex head fasteners. Will also fit a Klein Tools screwdriver handle (Cat. No. 32308).
Klein Tools 3/16" TO 7/8" 12-HOLE STEP UNIBITS KLE 59014
Straight, Double Fluted Step Drill Bits from Klein Tools provide cleaner cutting and drilling. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. 3/8-Inch hex shank is durable, and has a firm, positive grip. Laser-etched markings provide quick size identification on primary holes. This step bit has 12-hole sizes from 3/16-Inch to 7/8-Inch (4.8 to 22.2 mm).
Klein Tools 3/16" TO 7/8" TITANIUM STEP UNIBIT KLE 59014-T
KleinĀ® UnibitĀ® 59014T Step Drill Bit, 3/16 in Dia Min Hole, 7/8 in Dia Max Hole, 12 Steps, HSS, 12 Hole Sizes, 3/8 in Shank
Klein Tools 3/16" X 5-1/2" PIN PUNCHES KLE 66324
The Klein 66324 Pin Punch is made from high-carbon steel for durability. It has a precision-ground shank. It is also heat-treated for added strength and hardness at the working end.
Klein Tools 3/16" X 6" CABINET TIP SCREWDRIVER KLE A-316-6
KleinĀ® screwdrivers give professionals extra quality features that have made the KleinĀ® name famous for hand tools features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability. All KleinĀ® drivers are made of the highest quality tempered steel, carefully heat treated for maximum strength. Shafts have integral flanges that provide an extra strong, torque proof anchor in the handle. Strong, durable black tips are forged and precision ground with square edges to fit screw openings securely. They resist slippage and provide positive turning action.
Klein Tools 3/16" X 6" RAPID DRIVE SCREWDRIVER KLE 670-6
Save time and effort, especially on long-threaded screws in switch plates, light fixtures, etc. with Klein's Rapi-DrivĀ® screwdriver. Crank-action gets the job done fast with less fatigue. Cushion-Gripā¢ handle provides greater torque and comfort. The cabinet tip is precision-machined for exact fit.
Klein Tools 3/16" X 7"-SHANK T-HANDLE HEX KEYS KLE 79212
KleinĀ® 79212 Hex Key, T-Handle Handle, Steel
Klein Tools 3/16"-HEX 6-POINT NUTDRIVERS KLE 630-3/16
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Fits over long bolts and studs; internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Made in USA
Handle end color coded for easy identification
Cushion-Gripā¢ handle for greater torque and comfort
Tip-IdentĀ® quickly identifies nut driver and size
Klein Tools 3/16"-HEX INSULATED NUTDRIVERS KLE 630-3/16-INS
KleinĀ® 630-3/16-INS Nut Driver, 3/16 in, Hollow Shank, Cushion Grip Handle
Klein Tools 3/16"-HEX INSULATED NUTDRIVERS KLE 630-3/16-INS
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripā¢ handles for greater torque and comfort.
Klein Tools 3/16"-SLOT 10"-RD/SHK SCREWDRIVERS KLE 601-10
The narrow cabinet tip of this screwdriver gives your blade access in places where space is limited. Klein's exclusive Cushion-Gripā¢ handle offers greater torque and outstanding comfort. The patented Tip- IdentĀ® quickly identifies the type of screwdriver and screwdriver tip orientation. Premium chrome plated for smooth feel and corrosion resistance.
Klein Tools 3/16"-SLOT 10"-SHANK SCREWDRIVERS KLE 621-10
Plastic coated for circuit protection only. NOT INSULATED.
Special plastic coating resists cutting, cracking, and chipping.
Thin coating permits use in confined areas.
Cushion-Gripā¢ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Meets or exceeds applicable ASME / ANSI specifications.
Tip-IdentĀ® quickly identifies the screwdriver type and tip orientation.
Recently Viewed
1/2" DRIVE HEAVY DUTY AIR IMPACT WRENCH, DYNA-PACT OIL BATH CLUTCH, ONE HAND PUSH BUTTON FORWARD & REVERSE, 4" POSITIVE POWER SETTINGS, FULL POWER REVERSE, HANDLE EXHAUST
ProtoĀ® TorquePlusā¢ J7416S Standard Length Socket, Imperial, 1/2 in Square Drive, 1/2 in
ProtoĀ® TorquePlusā¢ J5320 Deep Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
5/8" X 11" NAIL CLAW/PULLER - STA55033>
LutzĀ® 22210 2-in-1 Multi-Bit Screwdriver, 2 Pieces, Fluted Handle, Chrome Vanadium Steel
LutzĀ® 22210 2-in-1 Multi-Bit Screwdriver, 2 Pieces, Fluted Handle, Chrome Vanadium Steel
1-1/2" METAL SPIRAL GASKETS-TEA801503>
