Klein Tools
Klein Tools CONDUIT REAMER BLADES KLE 19351
Klein® 19351 Conduit Reamer Replacement Blade
Klein Tools CONDUIT LOCKNUT/REAMING PLIERS KLE D-333-8
The Conduit Locknut and Reaming Pliers tighten up to 3/4-inch EMT and 1/2-inch rigid locknuts. The special jaw is designed for locknuts, conduit and caps. Serrated jaws deburr the outside while the nose reams and smooths the inside of conduit up to 3/4-inch EMT. The long-nose design makes it easier to reach into electrical boxes.
Klein Tools CONDUIT FTG/REAMING SCREWDRIVERS KLE 85191
The Klein Tools Conduit-Fitting and Reaming Screwdriver can ream and smooth 1/2'' (13 mm), 3/4'' (19 mm), and 1'' (25 mm) thin-wall conduit. It features a hooded-blade design that keeps the screwdriver tip from slipping out of screws, which is especially handy when tightening hard-to-reach conduit fittings. This screwdriver has a longer Cushion-Gripâ„¢ handle for even more comfort and torque while reaming.
Klein Tools CONDUIT BLADE KLE 19353
Conduit replacement blade kit comes with two blades. For use with Klein Tools Cat. Nos. 85191 and 19352. Features a lifetime guarantee of quality and reliability.
Klein Tools COMPASS SAW W/MAGIC SLOT 8" BLADE KLE 703
Magic-Slot design allows fast blade changing without removing thumbscrew. Strong, lightweight handle is contoured for comfort. High-quality carbon steel 8 in. blade has 10 teeth per inch for general-purpose use.
Klein Tools COMBO KNIFE AND SCISSOR SHARPENERS KLE 48036
Keep your blades sharp with the Klein Tools Knife and Scissors Sharpener. The sharpener features tungsten inserts that conveniently sharpen both sides of the blade at the same time. The built-in guard protects your hand and fingers while you cut. The sharpener has a compact and lightweight design making it easy to store or transport.
Klein Tools CLOSEABLE CORDURA POUCHES KLE 5714
Keep loose parts secure on the job site in Klein Tools' PowerLine Closeable Pouch. This sizeable pouch is great for holding fasteners, nails, wire nuts, or any other small parts. It has a belt attachment for easy access while at work.
Klein Tools CIRCUIT BREAKER FINDER ACC KITS KLE 69411
The Klein Tools circuit breaker kit allows your circuit breaker finder to do more than just indicate standard circuits. Adapters in this kit indicate the correct breaker of bare wires or other exposed conductors. Adapters also indicate the correct breaker for light fixtures.
Klein Tools CHOKER HITCH ANCHORS KLE 87920
Klein® 87920 Anchorage Connector, For Use With 2 in Wide Webbing, 5000 lb Load Capacity, 3 ft Connecting Cable, Nylon
Klein Tools CAP VISOR LIGHTS KLE 56402
Klein Tools’ Cap Visor LED Light allows you to easily add light to any hat or cap when you need light but don't want a traditional headlamp. The metal clip on Klein's new headlamp is contoured to fit securely onto the visor of your cap. Powered by two AAA batteries, this sturdy light also has a pivoting head to direct the bright, five LEDs right where you need them. Our new Cap Visor Lights are perfect when you need a light for your other work hat.
Klein Tools CAP STYLE HARDHATS WITH HEADLIGHTS KLE 60107-RL
Klein Tools Hard Hats were designed and engineered for optimal safety, comfort, and fit. Unique features allow the user to work comfortably in a wide variety of applications and demanding environments. Patent-pending accessory mounts on the front and back ensure Klein Headlamps attach securely without the need for straps.
Klein Tools CANVAS UTILITY BAGS KLE 5142
This Utility Bag, made of heavy No. 8 canvas, straps on belts up to 3-Inch wide for on-the go tool storage (belts not included). The 10-Inch tool bag with metal snaps on the loops provide for easy attachment to belts. This soft-sided bag is durable and features a 1/4-Inch rope-reinforced opening for bag longevity.
Klein Tools CABLE-SKINNING-STYLE UTILITY KNIFE KLE 44218
Cable skinning is very damaging to blades, so protect your personal pocket knife and stop wasting time sharpening the blade. Klein's new folding cable skinning utility knife has a replaceable hawkbill blade. After a long session of cable skinning, just replace the blade and get back to work.
Klein Tools CABLE SPLICERS KITS KLE 46037
Klein Tools' Cable Splicer's Kit contains a knife, pouch and Electrician's Scissors. The knife's textured handle provides a firm, comfortable grip. The pouch is riveted and stitched for extra durability. The Electrician's Scissors feature notches for stripping 19 AWG and 23 AWG.
Klein Tools CABLE SPLICER KNIVES KLE 44200
Cable Splicers Knife. Special-purpose short blade with comfortable, full-sized, heavy-duty handle. Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge. Handle is textured for comfort and firm grip. Hang hole for easy storage and portability.
Klein Tools BX & FLEXIBLE CONDUIT CUTTERS KLE 53725
The Klein Tools BX and Armored Cable Cutter is simple to use. It easily cuts armored cable up to 3/8-Inch (9.5 mm) diameter: BX, AC, MC, MCAP and Greenfield, with a couple of turns of the handle. Swift cutting blade eliminates burrs and won't nick cable. Comes with one blade stored in handle for convenience. Up to six replacement blades can be stored in handle.
Klein Tools BULL PIN/BOLT TOOL HOLDERS/POUCHES KLE 5417-T
The Klein Tools Bull-Pin Holder holds all standard bull pins. It's made of leather and riveted to make it more durable. Holder can be attached to a belt.
Klein Tools BULL PIN/BOLT LEATHER BAGS KLE 5416-L
The Klein Tools Bull-Pin and Bolt Bag is a great way to carry all of your bolts and bull pins while on the job. The 10-Inch deep bolt bag holds a large amount of steel working bolts while the side loops holster your bull pins when not in use. The durable leather material resists most jobsite hazards. The tunnel belt loop accommodates belts up to 3-Inch wide.
Klein Tools BULL PIN/BOLT CANVAS BAGS KLE 5416-T
Klein Tools' Bull-Pin and Bolt Bag is built from sturdy canvas with a double layer of canvas on the bottom where it's needed most. Having durable storage solutions on the jobsite is a must. This Tool Pouch is also stitched and riveted for added strength.
Klein Tools BULL PIN/BOLT CANVAS BAGS KLE 5416
The Klein bolt bag features bolt pin loops on each side for easy access. The #4 sturdy canvas and durable double bottom can withstand the most extreme job sites. Hang on your belt for easy access.
Klein Tools BOX CUTTER REPLACEMENT BLADES KLE 53726-SEN
Klein® 53726SEN Split Slug Replacement Blade
Klein Tools BOOM STRAPS KLE 87916
Klein® 87916 Boom Strap With Friction Buckle, 54 in L, Nylon
Klein Tools BODY HARNESSES WITH LANYARDS KLE 87150
Includes Fall-Arrest Harness and Deceleration Lanyard. Harness constructed with lightweight polyester for all-day comfort. Made in the United States to ensure a longer tool life.
Klein Tools BLUETOOTH SPEAKER WITH STRAP KLE AEPJS-2
Klein Tools’ wireless Bluetooth® Speaker with Magnetic Strap offers great sound plus more mounting options. The flexible strap can be used on conduit, backpacks, cooler handles, belt loops... wherever you want to go. A magnet is smartly embedded in the strap allowing you to attach it to any ferrous surface. This speaker provides high-quality, crisp treble and bold bass via a wireless Bluetooth® connection or wired auxiliary input. With great sound, the hands-free speakerphone, and superior mounting options, this rugged speaker is essential for both on and off the job site.
Recently Viewed
MORSE® 17062 1424R Silver & Deming Drill, 1 in Drill - Decimal Inch, 1/2 in Shank, HSS
2-5/8" -IDX2-7/8" -OD O-RINGS
33-MM #5 SPLINE DR I/SOCKETS POLY BAG WITH BARCODE, WEIGHT 1.75 LBS.
