JTEKT Corporation
Koyo 39520 Type-TS Cup, 4-7/16 in OD, 15/16 in W Cup, 1-3/16 in W Bearing, 0.13 in Max House Fillet Radius
Koyo 36620 Cylindrical Bearing Cup
Koyo 34478 Inch Series Caged Round Bore Bearing Cup, 4.7812 in OD, 0.6875 in W Cup, 0.9688 in W Bearing, 0.08 in Max House Fillet Radius, 2.32 in Dia Max House Shoulder
Koyo 26823 Cylindrical Bearing Cup, 76.2 mm OD, 20.638 mm W Cup, 25.4 mm W Bearing, 73 mm Dia Max House Shoulder
Koyo 2520 Type-TS Cup, 2.615 in OD, 13/16 in W Cup, 1 in W Bearing, 0.13 in Max House Fillet Radius
Koyo 21212 Cylindrical Bearing Cup, 53.975 mm OD, 15.875 mm W Cup, 22.225 mm W Bearing, 50 mm Dia Max House Shoulder
Koyo 1922 Cylindrical Bearing Cup, 57.15 mm OD, 15.875 mm W Cup, 19.845 mm W Bearing, 53.5 mm Dia Max House Shoulder
Koyo 15243 Cylindrical Bearing Cup, 61.912 mm OD, 14.288 mm W Cup, 19.05 mm W Bearing, 58 mm Dia Max House Shoulder
Koyo 09196 Type-TS Cup, 1.938 in OD, 11/16 in W Cup, 0.9063 in W Bearing, 0.06 in Max House Fillet Radius
Koyo M802048 Type-TS Cone, 1-5/8 in Dia Bore, 1.01 in W Cone, 0.14 in Max Shaft Fillet Radius, 105 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo LM11749 Type-TS Cone, 11/16 in Dia Bore, 0.575 in W Cone, 0.05 in Max Shaft Fillet Radius, 31.8 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo JLM506849 J Series Type-TS Cone, 2.1654 in Dia Bore, 0.9055 in W Cone, 0.06 in Max Shaft Fillet Radius, 115 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo HM903249 Caged Cylindrical Bearing Cone, 44.45 mm Dia Bore, 28.575 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 124 kN Dynamic/120 kN Static Load, For Use With TSS Type 1-Row Tapered Roller Bearing
Koyo HM903245 Type-TSS Cone, 1-5/8 in Dia Bore, 1-1/8 in W Cone, 0.14 in Max Shaft Fillet Radius, 124 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo HM804843 Caged Bearing Cone, 44.45 mm Dia Bore, 29.37 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 130 kN Dynamic/140 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Koyo HM516449 Caged Cylindrical Bearing Cone, 82.55 mm Dia Bore, 39.688 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 222 kN Dynamic/306 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Koyo HM212047 Type-TS Cone, 2-1/2 in Dia Bore, 1-1/2 in W Cone, 0.28 in Max Shaft Fillet Radius, 249 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 47890 Caged Cylindrical Bearing Cone, 92.075 mm Dia Bore, 34.925 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 223 kN Dynamic/293 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 42350 Caged Cylindrical Bearing Cone, For Use With Tapered Roller Bearing
Koyo 39585 Type-TS Cone, 2-1/2 in Dia Bore, 1.142 in W Cone, 0.14 in Max Shaft Fillet Radius, 207 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 387 Type-TS Cone, 2-1/4 in Dia Bore, 0.864 in W Cone, 0.09 in Max Shaft Fillet Radius, 101 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 34300 Caged Cylindrical Bearing Cone, 76.2 mm Dia Bore, 23.012 mm W Cone, 2 mm Max Shaft Fillet Radius, 113 kN Dynamic/127 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Koyo 29585 Type-TS Cone, 2-1/2 in Dia Bore, 1 in W Cone, 0.14 in Max Shaft Fillet Radius, 143 kN Load, For Use With 1-Row Tapered Roller Bearings
Recently Viewed
375-WATT POWER INVERTER-PRIPV375 >
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150015 >
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
HCI Preferred Supplier 10024 Reducing Short Rod Nut, 1/2 x 3/8 in Nominal, SAE Flare Threaded UNF, Brass
HCI Preferred Supplier 10024 Reducing Short Rod Nut, 1/2 x 3/8 in Nominal, SAE Flare Threaded UNF, Brass
3/8" CUT COLD CHISEL 5/16" HEX - ALL25651 >
25/32" EXTERNAL RETAINING RING
