Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
-
BrandKoyo
-
UPC605790034244
-
Manufacturer Part Number47686
-
CountryUSA
-
Load Capacity245 kN
-
Cage MaterialSteel
-
TypeType-TS
-
Bore Diameter3-1/4 in
-
Suitable For Use With1-Row Tapered Roller Bearings
- 193 kN dynamic/245 kN static load
-
UNSPSC31171527
-
Standards/ApprovalsAISI/SAE 52100
-
Catalog
Recently Viewed
Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
JASON 966-14-M-55 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 966-MM PITCH LENGTH, 14-MM TOOTH PITCH, 55-MM WIDE
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
- JAS96614M55>
HUSH/SILENCER-STYLE SMOKE ALARMS-JWH513857>
TRANS STRAW SLOT CUP LIDS--CS/1000-WHY20OZLID >
1/2" GROUNDING ROD CLAMP - JWH554979>
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
- JAS800H075>
