IKO International
IKO LBB10 Inch Series Standard Linear Bushing, 5/8 in Dia Shaft, 1-1/8 in OD, 1-1/2 in L
IKO LBB10 Inch Series Standard Linear Bushing, 5/8 in Dia Shaft, 1-1/8 in OD, 1-1/2 in L
IKO LBB12 Inch Series Standard Linear Bushing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
IKO LBB12 Inch Series Standard Linear Bushing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
IKO LBB12UU Inch Series Standard Linear Bushing, Double Seal Closure, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
IKO LBB12UU Inch Series Standard Linear Bushing, Double Seal Closure, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
IKO LBB16 Inch Series Standard Linear Bushing, 1 in Dia Shaft, 1-9/16 in OD, 2-1/4 in L
IKO LBB16 Inch Series Standard Linear Bushing, 1 in Dia Shaft, 1-9/16 in OD, 2-1/4 in L
IKO LBB20 Inch Series Standard Linear Bushing, 1-1/4 in Dia Shaft, 2 in OD, 2-5/8 in L
IKO LBB20 Inch Series Standard Linear Bushing, 1-1/4 in Dia Shaft, 2 in OD, 2-5/8 in L
IKO LBB4 Inch Series Standard Linear Bushing, 1/4 in Dia Shaft, 1/2 in OD, 3/4 in L
IKO LBB4 Inch Series Standard Linear Bushing, 1/4 in Dia Shaft, 1/2 in OD, 3/4 in L
IKO LBB6 Inch Series Standard Linear Bushing, 3/8 in Dia Shaft, 5/8 in OD, 7/8 in L
IKO LBB6 Inch Series Standard Linear Bushing, 3/8 in Dia Shaft, 5/8 in OD, 7/8 in L
IKO LBB6UU Inch Series Standard Linear Bushing, Double Seal Closure, 3/8 in Dia Shaft, 5/8 in OD, 7/8 in L
IKO LBB6UU Inch Series Standard Linear Bushing, Double Seal Closure, 3/8 in Dia Shaft, 5/8 in OD, 7/8 in L
IKO LBB8 Inch Series Standard Linear Bushing, 1/2 in Dia Shaft, 7/8 in OD, 1-1/4 in L
IKO LBB8 Inch Series Standard Linear Bushing, 1/2 in Dia Shaft, 7/8 in OD, 1-1/4 in L
IKO LBB8UU Inch Series Standard Linear Bushing, Double Seal Closure, 1/2 in Dia Shaft, 7/8 in OD, 1-1/4 in L
IKO LBB8UU Inch Series Standard Linear Bushing, Double Seal Closure, 1/2 in Dia Shaft, 7/8 in OD, 1-1/4 in L
IKO LBE20 Metric Series Standard Linear Bushing, 20 mm Dia Shaft, 32 mm OD, 45 mm L
IKO LBE20 Metric Series Standard Linear Bushing, 20 mm Dia Shaft, 32 mm OD, 45 mm L
IKO LHS12 L-Ball Rod End, 12 mm Dia Bore, 32 mm W, 12400 N Static Load, Die Cast Zinc
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO LHS6 L-Ball Rod End, 6 mm Dia Bore, 19.5 mm W, 3290 N Static Load, Die Cast Zinc
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO LHS8 L-Ball Rod End, 8 mm Dia Bore, 24 mm W, 4900 N Static Load, Die Cast Zinc
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO LHS8L L-Ball Rod End, 8 mm Dia Bore, 24 mm W, 4900 N Static Load, Die Cast Zinc
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO LHSA6L L-Ball Rod End, 6 mm Dia Bore, 19 mm W, 1670 N Static Load, Die Cast Zinc
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO LK2030UU Metric Series Compact Linear Bushing, Double Seal Closure, 20 mm Dia Shaft, 28 mm OD, 30 mm L
IKO LK2030UU Metric Series Compact Linear Bushing, Double Seal Closure, 20 mm Dia Shaft, 28 mm OD, 30 mm L
IKO LM81524 Metric Series Standard Linear Bushing, 8 mm Dia Shaft, 15 mm OD, 24 mm L
Linear Bushings (LM) feature a high precision design comprised of a rolling guide that travels along a shaft to achieve unlimited linear motion. A specialized retainer is used to accurately guide interior steel balls for low friction and highly stable linear motion.
IKO LRB101412 Inch Series Inner Ring With Oil Groove, 5/8 in ID x 7/8 in OD, 19.3 mm OAW, For Use With BR142212 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
IKO LRB121612 Inch Series Inner Ring With Oil Groove, 3/4 in ID x 1 in OD, 19.3 mm OAW, For Use With BR162412 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
IKO LRB121616 Inch Series Inner Ring With Oil Groove, 3/4 in ID x 1 in OD, 25.65 mm OAW, For Use With BR162416 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
IKO LRB141816 Inch Series Inner Ring With Oil Groove, 7/8 in ID x 1-1/8 in OD, 25.65 mm OAW, For Use With BR182616 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
IKO LRB141820 Inch Series Inner Ring With Oil Groove, 7/8 in ID x 1-1/8 in OD, 32 mm OAW, For Use With BR182620 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
IKO LRB162016 Inch Series Inner Ring With Oil Groove, 1 in ID x 1-1/4 in OD, 25.65 mm OAW, For Use With BR202816 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
Recently Viewed
110-GALLON CAPACITY 14-GAUGE STEEL FUEL TRANSFER TANK - WTG360301>
LittelfuseĀ® POWR-GARDĀ® JLLS100 Current Limiting Fast Acting Fuse, 100 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving class T fuses are the most compact fuses available in ratings above 30 A less than one-third the size of comparable class R fuses. When rated in accordance with the NEC, class T fuses provide fast acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of class T fuses must be increased to prevent opening on inrush currents. In such instances, class T fuses may provide only short circuit protection.
LittelfuseĀ® POWR-GARDĀ® JLLN250 Current Limiting Fast Acting Fuse, 250 A, 300 V AC/125 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
LittelfuseĀ® POWR-GARDĀ® JLLN110 Current Limiting Fast Acting Fuse, 110 A, 300 V AC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
LittelfuseĀ® POWR-GARDĀ® JLLS125 Current Limiting Fast Acting Fuse, 125 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
24" SHELVES 24"D X 36"W 20-GAUGE GRAY SHELVES-PNC1H203624 >
