HCI PREFERRED SUPPLIER

5/16" WIRE ROPE THIMBLE-SWC3TH010 >

3/8" WIRE ROPE THIMBLES-SWC3TH015 >

1/2" WIRE ROPE THIMBLE-SWC3TH025 >

5/8" WIREROPE CABLE THIMBLES-SWC3TH030 >

3/4" WIRE ROPE CABLE THIMBLES-SWC3TH035 >

7/8" WIRE ROPE THIMBLE-SWC3TH040 >

3" 250# THREADED PIPE FLANGE-JPW3THRFLANGE250#>

EXTERNAL CIRCLIPS OR SNAP RINGS PRODUCED BY COILING OR FORMING AN EVEN SECTIONED WIRE. THEIR PERFORMANCE IS GENERALLY INFERIOR TO THE TAPERED SECTION 1400 TYPES DUE TO THE UNEVEN STRESSES WITH THE RINGS. WHEN FITTED, SNAP RINGS CANNOT CONTACT THE GROOVE FULLY BECAUSE OF THESE UNEVEN STRESSES

RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS

3" SOLID SHAFT COLLAR

3" X 4-1/2" X 13" BRONZE BARS-FEB3X41/2X13 >

3/16" STEEL BALLS-SSB316 >

3/16" X 36" O-1 OILHARD DRILLROD-DRI3/1601 >

3/16" 7X19 316 STAINLESS STEEL WIRE ROPE (FT)-SWC316500SS >

3/16" ALUMINUM WITH ROPE SLEEVES-SWC316SLEEVE >

3/16" HD 316 STAINLESS STEEL THIMBLES-SWC316SSTHIMBLE >

3/16" ALUMINUM WIRE CABLE STOPS-SWC316STOP >

THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150018 >

3/16" 2-PIECE CLAMP SHAFT COLLAR

3/16" -OD STEEL TUBING .035 WALL-FTG3/16X035 >

3/16" X 1" X 240" FLAT STEEL STOCK-JMS3/16X1X20 >

3/16" X 9" X 17" UHMW

3/32" X 36" O-1 OILHARD DRILLROD-DRI3/3201 >

3/32" ALUMINUM CABLE SLEEVES-SWC332SLEEVE >