HCI PREFERRED SUPPLIER
SP-01-040 1/2"-20 X 2-3/8" X 5-1/2" U-bolt With Nuts--card Of 2
1/2"-20 X 2-3/8" X 5-1/2" U-BOLT WITH NUTS--CARD OF 2 - REDSP01040>
SP-01-060 1/2"-20 X 3" X 7" U-bolt With Nuts--card Of 2
1/2"-20 X 3" X 7" U-BOLT WITH NUTS--CARD OF 2 - REDSP01060>
SP-01-080 9/16"-18 X 3" X 7-1/4" U-bolt--card Of 2
9/16"-18 X 3" X 7-1/4" U-BOLT--CARD OF 2 - REDSP01080>
SP-01-100 9/16"-18 X 3-1/2" X 8" U-bolt With Nuts--card Of 2
9/16"-18 X 3-1/2" X 8" U-BOLT WITH NUTS--CARD OF 2 - REDSP01100>
SP-01-120 1/2" X 1-1/2" X 5" Square U-bolt--card
1/2" X 1-1/2" X 5" SQUARE U-BOLT--CARD OF 2-REDSP01120 >
SP-01-140 9/16" X 1-3/4" X 5" Square U-bolt--card
9/16" X 1-3/4" X 5" SQUARE U-BOLT--CARD OF 2-REDSP01140 >
SP-01-160 9/16" X 2" X 5-3/4" Square U-bolt--card
9/16" X 2" X 5-3/4" SQUARE U-BOLT--CARD OF 2-REDSP01160 >
SP-03-020 2-1/4" -center Hole Shackle Strap
2-1/4" -CENTER HOLE SHACKLE STRAP-REDSP03020 >
SP-03-040 2-5/8" -center Hole Shackle Strap
2-5/8" -CENTER HOLE SHACKLE STRAP-REDSP03040 >
SP-03-060 3-1/8" -center Hole Shackle Strap
3-1/8" -CENTER HOLE SHACKLE STRAP-REDSP03060 >
SP-04-020 9/16" X 3" Shackle Bole 1-3/4" Spring
9/16" X 3" SHACKLE BOLE 1-3/4" SPRING-REDSP04020 >
SP-04-040 9/16" X 3-1/2" Shackle Bolt 2" Spring
9/16" X 3-1/2" SHACKLE BOLT 2" SPRING-REDSP04040 >
SP-05-060 9/16idx3/4odx1.75" L Nylon Bushing
9/16IDX3/4ODX1.75" L NYLON BUSHING-REDSP05060 >
SP-10079 SIOUX TOOLS 3/8" X 13/16" THRUST BEARING RACES
3/8" X 13/16" THRUST BEARING RACES-SIOSP10079>
SP-23 SEALMASTER 1-7/16"-ID PILLOW BLOCK UNITS
1-7/16"-ID PILLOW BLOCK UNITS-SEASP23 >
SP-28 SEALMASTER 1-3/4"-ID PILLOW BLOCK UNITS
1-3/4"-ID PILLOW BLOCK UNITS-SEASP28 >
Recently Viewed
14 TOOTH SPROCKETS FOR #40 CHAIN
WHITE TAMPIC POINTED SCRUB BRUSH-MAG161>
Dichtomatik 75102130 O-Ring, 208 Dash Number, 0.609 in ID x 0.887 in OD, FKM, 75 Shore A Durometer, Import, Custom 208-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
8-MM-PITCHX1040-MM TIMING BELT-JAS10408M35 >
HEAVY DUTY POLISHED TAMPICO TRUCK WASH BRUSH - MAG3028 >
