HCI PREFERRED SUPPLIER

2-1/4" -CENTER HOLE SHACKLE STRAP-REDSP03020 >

9/16" X 2" X 5-3/4" SQUARE U-BOLT--CARD OF 2-REDSP01160 >

9/16" X 1-3/4" X 5" SQUARE U-BOLT--CARD OF 2-REDSP01140 >

1/2" X 1-1/2" X 5" SQUARE U-BOLT--CARD OF 2-REDSP01120 >

9/16"-18 X 3-1/2" X 8" U-BOLT WITH NUTS--CARD OF 2 - REDSP01100>

9/16"-18 X 3" X 7-1/4" U-BOLT--CARD OF 2 - REDSP01080>

1/2"-20 X 3" X 7" U-BOLT WITH NUTS--CARD OF 2 - REDSP01060>

1/2"-20 X 2-3/8" X 5-1/2" U-BOLT WITH NUTS--CARD OF 2 - REDSP01040>

3/8"-24 X 1-3/4" X 4-1/4" U-BOLT WITH NUTS--CARD OF 2 - REDSP01020>

90-watt Low Pressure Sodium (LPS) High-Intensity Discharge (HID) light bulb. These highly efficient, tubular bulbs emit an intense monochromatic yellow-orange light (around 1700K to 1800K) and are traditionally used for streetlights, roadways, tunnels, bridges, and security area floodlighting. Because major manufacturers like Philips have largely discontinued traditional low-pressure sodium lamps, they are increasingly difficult to source, though third-party replacements and LED retrofit options are available.

35-WATT LOW SODIUM BULBS--#1069-A-BULSOX35 >

a highly powerful, specialized 180-watt Low Pressure Sodium (LPS) HID vapor lamp widely utilized for outdoor streetlights, highway lighting, and industrial security fixtures due to its distinct monochrome orange glow. Because traditional low-pressure sodium lamps are increasingly phased out by city authorities worldwide in favor of energy-efficient alternatives, finding precise legacy replacements can be difficult, and making a transition to modern LED retrofits is highly recommended.

.500" -IDX.625" VINYL TUBE (FT)-KPCSOF034 >

Adapter Sleeve - 4.9375 in Bore Dia., 101.12 mm Overall Length, 5.497-12 Thread Size, Steel Material

4-7/16" SPHERICAL BEARING ADAPTERS-WESSNW26X4716 >

Adapter Sleeves / Bearings: Designations starting with SNW correspond to standard tapered adapter sleeves used to mount bearings on shafts (common industrial parts from brands like Link-Belt/Wesco or SKF/Timken).Dimensions: The numbers often denote shaft sizes or specific outer/inner diameters (such as a 4-3/16" adapter).

3-15/16" SPHERICAL BEARING ADAPTER-WESSNW22X31516 >

Bore / Shaft Diameter: 4.0000 inches (101.60 mm) Thread Size: 4.325-12Overall Width / Length: 3.1960 inches (81.43 mm) Taper Ratio: 1:12Material: High-grade Steel Included Components: Comes complete with a slit sleeve, an AN22 lock nut, and a W22 lock washer.

3-1/2" SPHERICAL BEARING ADAPTER - WESSNW20X31/2>

SNW 17X2.15/16
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. The sleeves are slit and are supplied complete with an lock nut and locking device. They are easy to install and require no additional location on the shaft.
Easy to install
Complete with lock nut
Complete with locking device

2-7/16" SPHERICAL BEARING ADAPTERS-WESSNW15X2716 >

2-3/16" SPHERICAL BEARING ADAPTERS-WESSNW13X2316 >

The term Wesco nw13x21/4 does not match a standard product name or part number from Wesco Industrial Products or Wesco International. It may combine an NW13 metric/nominal size component (such as a braided hose or cable protection conduit) with dimensions like 21/4 inches.

Bore / Shaft Diameter: 3.4375 inches (3-7/16") Overall Length: 100.86 mm (approx. 3.97 inches) Thread Size: 3.918-12Included Components: S-120 sleeve, AN-20 locknut, and W-20 lockwasher Compatible Bearings: 22300K and 23200K series roller bearings