Apex Tool Group
Apex® 49-TX-20 Power Drive Bit, T20 Torx® Point, 1-15/16 in OAL, Steel
Apex® 49-TX-25 Power Drive Bit, T25 Torx® Point, 1-15/16 in OAL, Steel
Apex® 49-TX-30 Power Drive Bit, T30 Torx® Point, 1-15/16 in OAL, Steel
Apex® 49-TX-40 Power Drive Bit, T40 Torx® Point, 1-15/16 in OAL, Steel
Apex® 491-AI Single End Power Bit, #1 Phillips® Point, 2-3/4 in OAL
Apex® 491-AX Power Drive Bit, #1 Phillips® Point, 2-3/4 in OAL, Steel
Apex® 491-B-PZDX Screwdriver Bit, #1 POZIDRIV® Point, 3.5 in OAL
Apex® 491-BX Impact Rated Single End Power Drive Bit, #1 Phillips® Point, 3-1/2 in OAL
Apex® 491-BX Impact Rated Single End Power Drive Bit, #1 Phillips® Point, 3-1/2 in OAL
Apex® 491-C-PZDX Screwdriver Bit, #1 POZIDRIV® Point, 6 in OAL
Apex® 491-CX Power Drive Bit, #1 Phillips® Point, 6 in OAL, Steel
Apex® 491-PZDX Screwdriver Bit, #1 POZIDRIV® Point, 1.93 in OAL
Apex® 492-27X Screwdriver Bit, #2 Phillips® Point, 1.93 in OAL
Apex® 492-A-SFX Screwdriver Bit, #2 Sel-O-Fit® Point, 2.75 in OAL
Apex® 492-AI Screwdriver Bit, #2 Phillips® Point, 2.75 in OAL
Apex® 492-AX Power Drive Bit, #2 Phillips® Point, 2-3/4 in OAL, Steel
Apex® 492-B-ACR2-DX Power Drive Bits, #2 Phillips® Point, 3-1/2 in OAL
Apex® 492-B-ACR2X ACR® Power Drive Bit, #2 Phillips® Point, 3-1/2 in OAL, Steel
Apex® 492-B-ACR2X ACR® Power Drive Bit, #2 Phillips® Point, 3-1/2 in OAL, Steel
Apex® 492-B-PZDX Screwdriver Bit, #2 POZIDRIV® Point, 3.5 in OAL
Apex® 492-BI Screwdriver Bit, #2 Phillips® Point, 3.5 in OAL
Apex® 492-BX Power Drive Bit, #2 Phillips® Point, 3-1/2 in OAL, Steel
Apex® 492-C-PZDX Screwdriver Bit, #2 POZIDRIV® Point, 6 in OAL
Apex® 492-C-SFX Screwdriver Bit, #2 Sel-O-Fit® Point, 6 in OAL
Apex® 492-CI Screwdriver Bit, #2 Phillips® Point, 6 in OAL
Apex® 492-CX Power Drive Bit, #2 Phillips® Point, 6 in OAL, Steel
Recently Viewed
4-5/8" -IDX5-1/8" -OD O-RING
Xcelite R183 Pocket Clip Slotted Screwdriver 1/8 Tip 3 Blade 5-1/4 Overall
Brand Xcelite
Number of Items 1
Head Style Flat
Material Alloy Steel
Recommended Uses For Product Home hand tools
Drillco 215A120CP 2105 Spiral Point Tap, Right Hand Cutting, Oversized 5/16-18 Thread, Plug Chamfer, 2 Flutes, Uncoated, HSS
Oversize taps are similar in design to a standard tap, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize taps are used primarily where a part will be plated or treated after tapping.
SHORTENING SHIMS ARE PRECISION DIE CUT TO FIT WITH CLOSE TOLERANCES AROUND THE SHOULDER SCREW SHANK TO FIT UNDER THE SCREW HEAD. IT CONTAINS 3 THICKNESSES; 0.005" FROM 1095 BLUE TEMPERED SPRING STEEL AND 0.015" AND 0.032" FROM 1075 TEMPERED SPRING STEEL. IT FITS SIX DIFFERENT SHOULDER SCREW SIZES FROM 1/4" TO 3/4" DIAMETER.
-PRC26010 >
1-6 AL YALE HYDRAULIC DOOR CLOSERS-JWH240729>
MORSE® 15153 1437 General Purpose Screw Machine Drill, #17 Drill - Wire, 0.173 in Drill - Decimal Inch, HSS, Bright
