APACHE
APACHE 98108450 Hose Assembly With Static Wire, 3/4 in Nominal, MPT x MPT Crimped End Style, 10 ft L, 60 psi Working, Nitrile Rubber
APACHE 98108450 Hose Assembly With Static Wire, 3/4 in Nominal, MPT x MPT Crimped End Style, 10 ft L, 60 psi Working, Nitrile Rubber
APACHE 98108468 Hose Assembly With Static Wire, 3/4 in Nominal, MPT x MPT Crimped End Style, 20 ft L, 60 psi Working, Nitrile Rubber
Designed for use with 12 V and 110 V electric pumps to dispense gasoline, 15% ethanol, diesel, B10/20 biodiesel, kerosene, and oil. This high quality hose is constructed with a built in static wire to dissipate static electricity associated with electric pumps. It is coupled with male fittings on each end and internal spring guards, which prevent kinking at the fittings and dramatically extends the life of the assembly.
APACHE 98108485 Hose Assembly With Static Wire, 1 in Nominal, MPT x MPT Crimped End Style, 14 ft L, 60 psi Working, Nitrile Rubber
APACHE 98108485 Hose Assembly With Static Wire, 1 in Nominal, MPT x MPT Crimped End Style, 14 ft L, 60 psi Working, Nitrile Rubber
APACHE 99000233 Adapter Fuel Swivel, 3/4 x 3/4 in, MPT x FPT
APACHE 99000233 Adapter Fuel Swivel, 3/4 x 3/4 in, MPT x FPT
APACHE 99000246 Automatic Shut-Off Unleaded Fuel Nozzle With 3/4 in Spout, 14.531 gpm at 43.45 psi, 3/4 in FNPT Inlet, 15 psi
This 3/4 in automatic shut-off fuel dispensing nozzle is compatible with most 3/4 in fuel hoses without the use of adapter fittings. The red vinyl covered handle provides improved operator comfort and product identification, while protecting the vehicle from scratches and knicks.
APACHE 99000247 Automatic Shut-Off Diesel Unleaded Fuel Nozzle With 1 in Spout, 29.062 gpm, 1 in FNPT Inlet, 15 psi
This 1 in automatic shut-off fuel dispensing nozzle is compatible with most fuel hoses commonly found on diesel dispensing machines. The green vinyl covered handle provides improved operator comfort and product identification, while protecting the vehicle from scratches and knicks.
APACHE 99000270 Hex Reducer Bushing Fuel Nozzle Adapter, 1 x 3/4 in Nominal, MNPT x FNPT
APACHE 99000270 Hex Reducer Bushing Fuel Nozzle Adapter, 1 x 3/4 in Nominal, MNPT x FNPT
Recently Viewed
AI Mode Conversation: GREY PNEUMATIC 3772DYou said: GREY PNEUMATIC 3772DThe Grey Pneumatic 3772D is a 3/4-inch drive x 2-1/4-inch-deep truck pinion locknut impact socket. It is explicitly engineered for professional heavy-duty servicing of transmission, differential, and end yoke locknuts on a wide variety of commercial trucks. Key Technical Specifications Drive Size: 3/4"Socket Size: 2-1/4" SAE (6-point hex configuration)Material: Premium heat-treated Chrome-Molybdenum (Cr-Mo) alloy steel for elite high-impact durability Wall Thickness: Extra-thin wall design to fit into highly restricted, recessed clearance areas Weight & Dimensions: Weighs 3.3 lbs with an overall length of 4.1 inches and a 3-inch bolt clearance depth
AI Mode Conversation: GREY PNEUMATIC 3764DYou said: GREY PNEUMATIC 3764DThe Grey Pneumatic 3764D is a 3/4-inch drive x 2-inch-deep truck pinion locknut impact socket. It is built from high-strength chrome-molybdenum alloy steel and features an extra-thin wall design specifically engineered to fit transmission, differential, and yoke locknuts on commercial trucks. Key Specifications & Pricing Drive Size: 3/4" square drive Socket Size: 2" (6-point hex) Wall Profile: Extra-thin wall (Note: Due to the thin wall, you should never use reducing adapters with larger 1" drive impact tools). Weight: 2.61 lbs Warranty: Backed by Grey Pneumatic's Lifetime Warranty. Retail Price: Usually ranges from $76.00 to $92.00 depending on the retailer.
The Grey Pneumatic 3768D is a professional-grade 3/4-inch drive x 2-1/8-inch deep-length truck pinion locknut impact socket. It is specifically engineered to remove and install transmission and differential end yoke locknuts on a wide variety of trucks. Key Technical Specifications Drive Size: 3/4 inch Socket Size (Hex): 2-1/8 inches Socket Type: 6-Point deep impact socket with an extra-thin wall design Material: High-strength Chrome Molybdenum (Cr-Mo) alloy steel for maximum durability Dimensions: 4.12 inches overall length, with a 3.00-inch bolt clearance depth and a 1.02-inch hex depth Weight: 2.9 lbs
The Grey Pneumatic 3780D is a 3/4-inch drive by 2-1/2-inch deep-length 6-point impact socket specifically designed for removing and installing transmission, differential, and yoke pinion locknuts on a wide variety of trucks. Key Technical Specifications Drive Size: 3/4"Socket Size: 2-1/2" (SAE 6-point) Material: High-grade Chrome-Molybdenum (Cr-Mo) alloy steel Dimensions: Drive end width of 2.87", socket end width of 3.27", and a total length of 4.1"Weight: 3.75 to 3.8 lbs
Poly bag with barcode
Lifetime Warranty
Well-thought-out design for ease of use
Made with attention to every detail for excellent results
Lightweight and durable construction for heavy use
Subject to numerous quality tests to eliminate any manufacturing defects
Product Details
3/4" Drive 1" 8-Point Standard Impact Socket (3532S) by Grey Pneumatic®. Made from the highest-grade material utilizing state-of-the-art manufacturing processes and equipment, this product will help you handle all your tasks easier and quicker. It delivers the perfect balance of strength and stiffness required for any of your high impact jobs.
Impact Socket
Type High Torque, 8-Point, Standard Length, SAE Fractional, Shape III
Drive End Size 3/4 Inch
Socket End Size 1-1/4 Inch
Outside Diameter 2.4 Inch
Overall Length 2.2 Inch
Material Chrome-Molybdenum Alloy Steel
Bolt Clearance Depth 1.22 Inch
Socket Depth 0.87 Inch
Application Automotive, Industrial, Assembly, Mining, Maintenance, Construction and Energy Industry
Packaging Type Poly Bag with Barcode
Features
All GP Impact Sockets feature the GP High Torque Drive
Increased Strength - Transfers the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Increased Torque - Allows up to 20 Percent more torque to be applied than on standard hex impact sockets
Easier Access to Tight Areas - The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas
Reduced Wear - Our impact sockets grip the fastener across a broader contact area, reducing the chance of rounding off fasteners
All GP Sockets feature extra-large size markings for quick identification
Grey Pneumatic ImpactSockets are designed for professional tool users.
They are engineeredspecifically for use with impact tools, using the most up to dateindustrial specifications.
Grey Pneumatic ImpactSockets are made from high quality alloy steel (chrome-molybdenum).
Grey Pneumatic ImpactSockets are tested to the highest specifications to deliver outstandingperformance.
Poly bag with barcode
Lifetime Warranty
