RIDGID® 47165 Pin, For Use With: Model 535 Pipe and Bolt Threading Machine
RIDGID® 47165 Pin, For Use With: Model 535 Pipe and Bolt Threading Machine
-
BrandRIDGID®
-
UPC095691471659
-
Manufacturer Part Number47165
-
CountryUSA
-
Suitable For Use WithModel 535 Pipe and Bolt Threading Machine
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyLifetime
-
Warranty Information
-
Catalog
Recently Viewed
RIDGID® 47165 Pin, For Use With: Model 535 Pipe and Bolt Threading Machine
RIDGID® 47165 Pin, For Use With: Model 535 Pipe and Bolt Threading Machine
Sioux Chief 524-10PK2 Metal Hanger Strap, Alternating 1/4 and 3/16 in Hole, 10 ft L x 3/4 in W, Galvanized
Sioux Chief metal hanger strap shall be used where necessary to support CTS, IPS or DWV pipe. Metal strap shall be made with galvanized or copper-plated steel and installed in accordance with national codes pertaining to hanger spacing and slope requirements. Metal hanger strap shall feature 1/4 or 3/16 in pre-drilled pilot holes in alternating pattern and strap shall be 3/4 in wide.
4" X 21-3/4" COARSE SANDING BELT-JWH339850 >
United Abrasives-SAIT Stud King® 24050 Type 1 Externally Reinforced Cut-Off Wheel, 14 in Dia x 3/32 in THK, 1 in Center Hole, 36 Grit, Aluminum Oxide Abrasive
The United Abrasives/SAIT Stud King® Chop Saw Wheels are made for general purpose cool cutting on thin metals amd are composed of aluminum oxide grain. United Abrasives/SAIT wheels are constructed using the highest quality fiberglass to withstand the toughest applications. Proudly manufactured in the USA.
Champion SA80-.776 Car/Maintenance Reamer, 0.776 in Dia x 7 in OAL, 1/2 in Dia Straight Shank, Left Helical Flute
Champion SA80-.776 Car/Maintenance Reamer, 0.776 in Dia x 7 in OAL, 1/2 in Dia Straight Shank, Left Hand Helix Flute
This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick-drying fluid cures in 24 hours and will not deteriorate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV.
