Magnetic Drilling Press Accessories
HougenĀ® 05779 Wear-Resistant Carbide Insert, For Use With Carbide Countersink Kit
HougenĀ® 05779 Wear-Resistant Carbide Insert, For Use With Carbide Countersink Kit
MilwaukeeĀ® 4262-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 350 rpm No Load, 3/4 in Drill Capacity, 3/4 in Hex Chuck Size, 30.9 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4 in. chuck. This unit has 350 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.
MilwaukeeĀ® 4292-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 750 rpm No Load, 1-1/4 in Drill Capacity, 1 in Chuck Size, 4 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 375 and 750 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
MilwaukeeĀ® 4297-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 500 rpm No Load, 1-1/4 in Drill Capacity, 1-3/16 in Chuck Size, 8 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
MilwaukeeĀ® HAMMERVACā¢ 4253-1 Keyed Magnetic Motor, For Use With Electromagnetic Drill Press
Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.
Recently Viewed
BrassCraftĀ® G2R10X C1 1/4 Turn Water Supply Stop, 3/8 in Nominal, FNPT x Compression, 125 psi, Brass Body, Polished Chrome, Domestic
BrassCraft 3/8 in FIP Inlet x 3/8 in OD Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures ā faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
3" X 110-YD CLEAR BOX SEALING TAPE-ATC61003X110YD >
JustriteĀ® Sure-GripĀ® EX 891221 Compac Flammable Liquid Safety Cabinet, 12 gal Capacity, Recessed Paddle Handle, 35 in H x 23-1/4 in W x 18 in D, Self-Close Door, 1 Door, 1 Shelf, Cold Rolled Steel, Red
These cabinets are ideal when storing lesser quantities of flammable liquids at a workstation or adding to existing storage capacities. Compac Safety Cabinets fit almost anywhere and provide protection even where space is at a premium. Only 591 mm wide, they hold a full 12- or 15-gallons (45- or 57-L) of flammables. Available in manual close or self-close. For the safe storage of lesser quantities of flammable liquids to avoid risk of potential fire hazards and chemical spills in industries like chemical manufacturing, petrochemical and laboratories.
MorseĀ® AV18 Master CobaltĀ® Heavy Duty Hole Saw, 1-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge, 1/2/2020 Arbor
Premium line of professional quality bi-metal hole saws feature an M3 high-speed steel cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. Cutting depth is 1-1/2 in. Arbor required.
MorseĀ® AV42 Master CobaltĀ® Heavy Duty Hole Saw, 2-5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
MorseĀ® AV42 Master CobaltĀ® Heavy Duty Hole Saw, 2-5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
