Minute Man® 22258 Replacement Extra Shim, C Broach, 1/16 in THK, 3/8 in Keyway
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
-
BrandMinute Man®
-
UPC662600222581
-
Manufacturer Part Number22258
-
CountryUSA
-
FinishPlain
-
Thickness1/16 in
-
MaterialHSS
-
Measurement SystemImperial
-
TypeReplacement
-
Keyway Size3/8 in
-
Length2-1/2 in
-
Suitable For Use WithKeyway Broach
-
Broach StyleC
-
UNSPSC23241602
-
Package Description2/ST
-
Catalog
Recently Viewed
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
3/8" DIAMETERX2-1/2" DOWEL PIN-HOL01106 >
Browning® 767877 VPLS 100 Intermediate Duty Low Base Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6-7/16 to 7-7/16 in L Bolt Center-to-Center, 2-7/16 in Base to Bore Centerline, 8-13/16 in OAL x 4-29/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Browning® 1224435 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 35 Teeth, 3-1/2 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Milwaukee Hand Trucks 47118 Hand Truck With 10 in Solid Puncture Proof Tires, 800 lb Load, 50-1/2 in H x 17-1/4 in W x 20 in D
Milwaukee Hand Trucks 47118 Hand Truck With 10 in Solid Puncture Proof Tires, 800 lb Load, 50-1/2 in H x 17-1/4 in W x 20 in D
