WD-40® 490057 Multi-Use Smart Straw Lubricant, 12 oz Aerosol Can, Liquid Form, Light Amber, 0.8
WD-40® 490057 Multi-Use Smart Straw Lubricant, 12 oz Aerosol Can, Liquid Form, Light Amber, 0.8 WD40
-
BrandWD-40®
-
Manufacturer Part Number490057
-
CountryUSA
-
Temperature Range-60 to 300 deg F
-
Flash Point122 deg F
-
FormLiquid
-
ColorLight Amber
-
TypeMulti-Use
-
CompositionAliphatic Hydrocarbon, Petroleum Base Oil, LVP Aliphatic Hydrocarbon, Carbon Dioxide
-
VOC Content412 g/L
-
Viscosity2.79 to 2.96 cSt
-
Container Size12 oz
-
Container TypeAerosol Can
-
Base TypeMineral Oil
-
Specific Gravity0.8
-
Odor/ScentMild Petroleum
- Permanently attached Smart Straw™
- Sprays 2 Ways™
- Flip up for stream, down for spray
- WD-40® displaces moisture, it quickly dries out electrical systems to eliminate moisture induced short circuits
- WD-40® protects metal surfaces with corrosion resistant ingredients to shield against moisture and other corrosive elements
- WD-40® loosens rust to metal bonds and frees stuck, frozen or rusted metal parts
- WD-40® gets under grease, grime and gunk
- WD-40® non-aerosol formulas also dissolve adhesives, allowing easy removal of labels, tape, stickers and excess bonding material
- WD-40® lubricating ingredients are widely dispersed and hold firmly to all moving parts
- 361 to 369 deg F boiling point
- 95 to 115 psi vapor pressure
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 20JY62 |
-
UNSPSC15121520
-
Package DescriptionEACH
-
Standards/ApprovalsOSHA Compliant|CARB Compliant
Recently Viewed
WD-40® 490057 Multi-Use Smart Straw Lubricant, 12 oz Aerosol Can, Liquid Form, Light Amber, 0.8
WD-40® 490057 Multi-Use Smart Straw Lubricant, 12 oz Aerosol Can, Liquid Form, Light Amber, 0.8 WD40
HCI Preferred Supplier 944432 Lift In-Line Check Valve, 1 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944432 Lift In-Line Check Valve, 1 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944434 Lift In-Line Check Valve, 1-1/2 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944434 Lift In-Line Check Valve, 1-1/2 in Nominal, NPT End Style, Forged Brass Body
Koyo 6305ZZ 6300 Round Deep Groove Ball Bearing, 25 mm Dia Bore, 62 mm Dia Outside, 1 Rows, 17 mm W, 25.7 kN Dynamic/11.3 kN Static Load
Koyo 6305ZZ 6300 Round Deep Groove Ball Bearing, 25 mm Dia Bore, 62 mm Dia Outside, 1 Rows, 17 mm W, 25.7 kN Dynamic/11.3 kN Static Load
Browning® 1045376 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 486664 Lag Screw, 5/8 in, 4 in OAL, Low Carbon Steel, Zinc Blue
