LPS Chemical 5-GAL LPS-1 GREASELESS LUBRICANT LPS 00105
-
BrandLPS®
-
UPC078827001050
-
Manufacturer Part Number00105
-
CountryUSA|Canada
-
Temperature Range40 to 120 deg F
-
Flammability Rating0.6% Lower, 7% Upper
-
Flash Point79 deg C
-
FormLiquid
-
ColorPale Amber
-
GradeFood
-
CompositionDistillates Petroleum, Hydroteated Light, Distillates Petroleum Hydrotreated Med, Sorbitan Trioleate, Calcium Sulfonate
-
VOC Content<25%
-
Viscosity<3.8 cSt at 25 deg C
-
Container Size5 gal
-
Container TypeMetal Pail
-
Net Weight5 gal
-
Base TypeMineral Oil
-
Specific Gravity0.79 to 0.81
-
Odor/ScentCharacteristic
- The greaseless lubricant that penetrates quickly, displaces moisture and will not attract dust or dirt
- Provides a dry, thin, lubricating film
- Resists oil, dust and dirt build up
- Removes carbon build up from surfaces
- Displaces moisture
- Safe on paint, fabric and most plastics
- Used world-wide in aviation
- Non-conductive
- Does not contain silicone
- 32 kV dielectric strength
- 95 - 96% of percent volatile
- No chlorinated solvents
- Loosens rusted or frozen parts
- Fast acting penetration
- Ideal for delicate mechanisms
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | LJ6000105 |
-
UNSPSC15121520
-
Package Description1/PK
-
Standards/ApprovalsH2 Registration NSF Certified|Meets California Air Resources Board (CARB) VOC regulations for consumer products, Meets 2006 Ozone Transport Commission (OTC) model rules for consumer products, Allied Signal ES-2092, Boeing B737-500 Task 75-31-02-206-001-C00, Bombardier Canadair BAMS 569-001, Delta Airlines Lockheed Martin EPSN G34.031, Pratt & Whitney Canada CPMC 79255 Rev. C, Rolls Royce Overhaul Process 340 MIL-C-23411A, Nonfood Compounds Program Listed Category Code: H2 Registration 059847, 129040, Canadian Food Processing Establishments, NSN 7930-01-380-9028, NSN 9150-01-039-4745, NSN 9150-01-142-9773, HMIS 1/2/0, HMIS III 1/2/0|NFPA 1/2/0 Standard
-
SDS
Recently Viewed
HCI Preferred Supplier 22009 Sleeve Tube Insert, 3/16 in, Compression, Brass
HCI Preferred Supplier 22009 Sleeve Tube Insert, 3/16 in, Compression, Brass
EPC 10030738 101-R Solder Reducing Coupling, Coupling, 1 x 1/2 in Nominal, Solder End Style, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
EPC 10030788 101-R Solder Reducing Coupling, Coupling, 2 x 1 in Nominal, Solder End Style, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
Dense, compact crimped carbon steel wire brush face
May be stacked to achieve wider work face
Primary application: For general scale removal, cleaning and surface preparation
Standard 2" arbor, with adaptor to listed arbor
The Screw-Bolt+â„¢ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
