SPRAY-ON 10-OZ LU708 HIGH-PERFORM DRY LUBE 00708
Sprayon® S00708000 LU™208 Extreme Pressure High Performance Dry Lubricant, 16 oz Aerosol Can, Liquid Form, White, 0.64
-
BrandSprayon®
-
UPC075577907083
-
Manufacturer Part NumberS00708000
-
CountryUSA
-
Temperature Range12 to 646 deg F
-
Flammability Rating4
-
Flash Point-20.2 deg F
-
FormLiquid
-
ColorWhite
-
TypeExtreme Pressure High Performance
-
CompositionHeptane, Branched, Cyclic, Linear, Propane, Butane, Heptane, 2-Propanol, Toluene
-
VOC Content0.009841
-
Viscosity<7 cSt
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight10 oz
-
SeriesLU™208
-
Base TypePTFE
-
Specific Gravity0.64
-
Odor/ScentMild Solvent
- Safe on most plastics
- Lowest coefficient of friction
- Dries quickly to a white film to show coverage
- Extremely low static coefficient of friction for when low speeds and light loads are involved
- Reduces storage and disposal costs
- Has great anti-stick properties for use as an effective release agent
- Penetrant, water displacer
- Rust inhibitor
- 3 years shelf life
-
UNSPSC15121520
-
Package Description12/PK
-
Standards/ApprovalsOSHA 1910.94/1910.107
-
SDS
Recently Viewed
Sprayon® S00708000 LU™208 Extreme Pressure High Performance Dry Lubricant, 16 oz Aerosol Can, Liquid Form, White, 0.64
1-1/4" -FEMALE PIPE THREAD METAL BLACK TEE-FIT11/4BT >
Slip-On Black Eyeglass Cord / Lanyard Rubber Loops with Metal Clamps 25 Inch Length Tip to Tip Metal Detectable Stylish cord helps you keep up with your glasses MCR Safety offers a variety of eyewear cords to assist in the care and maintenance of your safety glasses. The 210 is a black nylon eyewear cord that helps you keep up with your safety glasses in style. Rubber loops on each end of the cord slips over the temple tips of your eyewear and keeps them secure. This cord is metal detectable.
1 SOCKET WELD TEE
Alemite® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Keeney 400WK P-Trap, 1-1/2 in Inlet x 1-1/4 in Outlet, White, PVC
