ANT 17075 PTFE SPRAY LIGHT COAT DRY LUBRICANT AND RELEASE AGENT
DRY FILM LUBRICANT AND RELEASE AGENT. NOT AFFECTED BY MOST CHEMICALS AND SOLVENTS. WILL NOT REACT OR COMBINE WITH PROCESS MATERIALS. FAST DRYING AND NON-STAINING. WILL NOT FREEZE.
-ANT17075 >
Recently Viewed
DRY FILM LUBRICANT AND RELEASE AGENT. NOT AFFECTED BY MOST CHEMICALS AND SOLVENTS. WILL NOT REACT OR COMBINE WITH PROCESS MATERIALS. FAST DRYING AND NON-STAINING. WILL NOT FREEZE.
-ANT17075 >
Greenlee® Slug-Buster® 7238SB Manual Knockout Punch Die Kit, 10 ga Capacity, For Use With Battery Powered/Hydraulic Ratchet Driver and 3/8 in and 3/4 in Draw Stud, 1/2 to 2 in Conduit/Pipe, Mild Steel
Greenlee® Slug-Buster® 7238SB Manual Knockout Punch Die Kit, 10 ga Capacity, For Use With Battery Powered/Hydraulic Ratchet Driver and 3/8 in and 3/4 in Draw Stud, 1/2 to 2 in Conduit/Pipe, Mild Steel
Cylindrical Roller Bearing – ‘NJ’ CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The ‘NJ’ Type bearings has shoulders on both sides of the outer ring and one shoulder on the inner ring. This allows the bearing to accept light axial loads in one direction. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers.
HCI Preferred Supplier 28274 90 deg Reducer Elbow, 1/4 x 1/8 in Nominal, MNPT End Style, Brass
HCI Preferred Supplier 28274 90 deg Reducer Elbow, 1/4 x 1/8 in Nominal, MNPT End Style, Brass
Irwin® 372606 Heavy Duty Reciprocating Saw Blade, 6 in L x 3/4 in W, 6, Bi-Metal Body
Irwin® 372606 Heavy Duty Reciprocating Saw Blade, 6 in L x 3/4 in W, 6, Bi-Metal Body
Leviton® 84011 Standard Size Traditional Combination Wall Plate, 3 Gangs, 6.37 in W x 4.5 in H, 430 Stainless Steel
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
