Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
-
BrandAlemite®
-
UPC098468114131
-
Manufacturer Part Number1720-B
-
CountryUSA
-
FinishTrivalent Zinc Plated
-
MaterialSteel
-
Thread Size1/8 in Special Taper Male
-
TypeStraight Thread Forming
-
Hex Size7/16 in
-
Shank Length0.24 in
-
Overall Length5/8 in
- Exceeds 72 hr salt spray test
- Dirt-excluding check ball
- Thread forming fittings have special tapered drive threads to reshape the material in an untapped hole to provide a leak proof seal
- Dyed yellow for identification
- Threads provide strong seal
- They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole
- Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 03244662 |
-
UNSPSC40141736
-
Standards/ApprovalsRoHS Compliant
-
Catalog
Recently Viewed
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Milwaukee® Steel Hawg® 49-57-0030 Arbor Assembly, 3/4 in Shank, For Use With 4262-1 Magnetic Drill Motor
Steel Hawg arbor with 3/4 in. shank for use in Milwaukee magnetic drill motor 4262 - 1. This arbor adapts threaded Steel Hawg cutters to a 3/4 in. chucked motor. For best cutting results use Hawg wash cutting fluid to keep cutting surface cool and lubricated. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately for distributing cutting fluid during drilling.
HCI Preferred Supplier 28266 90 deg Pipe Elbow, 1/8 in Nominal, MNPT End Style, Brass
HCI Preferred Supplier 28266 90 deg Pipe Elbow, 1/8 in Nominal, MNPT End Style, Brass
1/2" -ID BRASS HOSE SPLICERS-COIBS08 >
Remke 7303-011R Insulated Wide Range Strain Relief Grip, 0.52 to 0.73 in Cable Openings, Steel
Tuff-Seal™ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
