Alemite® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
-
BrandAlemite®
-
UPC098468100370
-
Manufacturer Part Number1723-B
-
CountryUSA
-
FinishTrivalent Zinc Plated
-
MaterialSteel
-
Thread Size1/8 in Taper
-
Type90 deg
-
Hex Size7/16 in
-
Overall Length49/64 in
- Exceeds 72 hrs salt spray test
- Dirt excluding check ball
- Threads provide strong seal
- Dyed yellow for identification
- 0.373 to 0.38 in hole
-
UNSPSC40141736
-
Package Description1/PK
-
Standards/ApprovalsRoHS Compliant
-
Catalog
Recently Viewed
Alemite® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Channellock® 3026-BULK Long Nose Plier, 2.08 in L x 3/4 in W, Cross Hatched/Straight High Carbon Steel Jaw, 6.1 in OAL
CHANNELLOCK® Long Nose Pliers are engineered to operate in tight spaces. A crosshatched teeth pattern provides reliable grip in either direction, while a narrow nose profile provides extra precision.
2-GAL 15-W-50 JT-8" MOTOR OIL-CAT12892GAL >
1 QT 20W MOTOR OIL
Crosby® 1010596 Fist Grip® G-429-7/8 Wire Rope Clip, 7/8 in, Forged Steel, 4 Clips, 26 in Rope Turn Back
Crosby® 1010596 Fist Grip® G-429 Wire Rope Clip, 7/8 in, Forged Steel, 4 Clips, 26 in Rope Turn Back
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
