Monroe Fluid AEROSOL COOL TOOL II CUT/TAP FLUID MNR 03-017
AEROSOL COOL TOOL II CUTTING AND TAPPING FLUIDS-MNR03017 >
-
BrandMonroe
-
Manufacturer Part Number0003-1-017
-
CountryUSA
-
FormLiquid
-
CompositionOil-Based
-
Container Size1 lb
-
Container TypeAerosol Can
-
SeriesCool Tool II
Recently Viewed
AEROSOL COOL TOOL II CUTTING AND TAPPING FLUIDS-MNR03017 >
11-OZ AEROSOL STARTING FLUID-RADM3815 >
Littelfuse® POWR-GARD® JLLS250 Current Limiting Fast Acting Fuse, 250 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
Gear belt - H, 0.5000 in Pitch, 125.0000 in Overall Length, 1.5000 in Width, 250 Teeth
Molded Teeth - Shear resistance teeth designed to provide smooth positive engagement with gearbelt pulleys. High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt. Compression Section - Bonds to belt cords for protections against dirt, grease, oil, ozone, and other environmental hazards.
8-OZ BAKERSEAL JOINT COMPOUND-RADT4008 >
1-3/4" ULTRA CUTTER HOLESAWS-GRN92513/4>
