Champion XLUB-WAX-2 Multi-Purpose Cutting Fluid, 2 oz Tub, Solid, Amber
Formulated to extend tool life, reduce chip welding and clings to the tool at any angle, including overhead operations. Continuous shield against friction and heat, reducing tool costs and work piece scrap. Provides a close tolerance precision finish. Effective on stainless steel, aluminum and exotic alloys.
-
BrandChampion
-
UPC846035055901
-
Manufacturer Part NumberXLUB-WAX-2
-
CountryUSA
-
Flash Point> 415 deg F
-
FormSolid
-
ColorAmber
-
TypeMulti-Purpose
-
Container Size2 oz
-
Container TypeTub
-
Specific Gravity0.85
-
UNSPSC15121520
-
Standards/ApprovalsOSHA Compliant
Recently Viewed
Champion XLUB-WAX-2 Multi-Purpose Cutting Fluid, 2 oz Tub, Solid, Amber
Formulated to extend tool life, reduce chip welding and clings to the tool at any angle, including overhead operations. Continuous shield against friction and heat, reducing tool costs and work piece scrap. Provides a close tolerance precision finish. Effective on stainless steel, aluminum and exotic alloys.
Midland Industries 80-001 Dry Standard Pressure Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial
Midland Industries 80-001 Dry Standard Pressure Gauge, 0 to 15 psi, 1/4 in Connection, 2 in Dial
GAUGE ADAPTORS-ENEGA45GC>
Alemite® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Alemite® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
1/4" X 5'MPT RIGID SWIVEL BLUE HOSE-COIPU145AB >
