Appleton® UNILETS™ 8438R Ball Swivel Hanger Cover, 1/2 in, For Use With SHC Flexible Fixture Hanger, Malleable Iron/Steel
Appleton® UNILETS™ 8438R Ball Swivel Hanger Cover, 1/2 in, For Use With SHC Flexible Fixture Hanger, Malleable Iron/Steel
-
BrandAppleton®
-
UPC781381337021
-
Manufacturer Part Number8438R
-
CountryUSA|Canada
-
FinishClear Chromate/Zinc Electroplate
-
MaterialMalleable Iron/Steel
-
TypeBall
-
Size1/2 in
-
Suitable For Use WithSHC Flexible Fixture Hanger
- Protect fixture against wind and vibration damage
- Cushion type for added protection where lighting fixtures are subjected to vibration
- Ball type swivel joint permits 20 deg swing from vertical
- Support fixtures with a maximum weight of 50 lb
- For use with threaded rigid metal conduit and IMC
-
Alternative Part Number8335445
-
UNSPSC39111817
-
IDEA Index ID8335445
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|UL 514A File No. E2527|CSA 065180
-
Warranty5 Years
-
Warranty Information
Recently Viewed
Appleton® UNILETS™ 8438R Ball Swivel Hanger Cover, 1/2 in, For Use With SHC Flexible Fixture Hanger, Malleable Iron/Steel
Appleton® UNILETS™ 8438R Ball Swivel Hanger Cover, 1/2 in, For Use With SHC Flexible Fixture Hanger, Malleable Iron/Steel
Dichtomatik 75102144 O-Ring, 222 Dash Number, 1.484 in ID x 1.762 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1/2" -HOSEX#8 MALE ORB 90 SWIVEL-MHDE0808MOBX90 >
1/2" -HOSEX#10 ORFS 902-WIRE-MHDE0810FF90 >
Browning® 767345 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/2 in Dia Bore, 4-7/8 to 5-7/8 in L Bolt Center-to-Center, 2 in Base to Bore Centerline, 7-1/8 in OAL x 4 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
HCI Preferred Supplier 6801NWO4 Elbow Connector, 7/16-20 Nominal, SAE Male JIC Flare x Male ORB, Steel
HCI Preferred Supplier 6801NWO4 Elbow Connector, 7/16-20 Nominal, SAE Male JIC Flare x Male ORB, Steel
