Landscape & Bow Rakes
Razor-Back® 63184 Heavy Duty Bow Rake, 15 Tines, Steel, Fiberglass Handle
Recently Viewed
Proto® J2336D Scraper Gasket, Carbon Steel Blade Beveled Blade, 12 in L Blade, 1-1/16 in W Blade, Hardwood Handle
Proto® J2336D Scraper Gasket, Carbon Steel Blade Beveled Blade, 12 in L Blade, 1-1/16 in W Blade, Hardwood Handle
Drillco 25A208B 2500 Straight Flute Tap, Right Hand Cutting, 1-1/8-8 Thread, Bottoming Chamfer, 4 Flutes, Bright, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
Drillco 31E120BC 3100E Adjustable Round Split Die, M12x1.25 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Milwaukee® 4262-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 350 rpm No Load, 3/4 in Drill Capacity, 3/4 in Hex Chuck Size, 30.9 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4 in. chuck. This unit has 350 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.
Milwaukee® 4297-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 500 rpm No Load, 1-1/4 in Drill Capacity, 1-3/16 in Chuck Size, 8 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
