Sealmaster 2-15/16"-ID SPH/OD INSERT BEARINGS SEA 2-215
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461000496
-
Manufacturer Part Number700052
-
CountryUSA
-
Load Capacity14839 lb Dynamic/11224 lb Static
-
Cage MaterialBrass
-
Temperature Rating-20 to 220 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed2450 rpm
-
Closure TypeDouble Seal
-
TypeNon-Expansion Standard Duty Straight Bore
-
Seal MaterialFelt
-
Width3-1/16 in
-
Bearing MaterialSteel
-
Outside Diameter5.1181 in
-
Bore Diameter2-15/16 in
- Wide outer ring
- Lock pin and dimple system
- The felt seal with flinger provides a tight labyrinth seal which retains lubrication and acts as a filter to exclude contamination
- Single setscrew locking is 120 deg spaced, balanced three point contact minimizes inner ring distortion vibration, reduces noise and improves reliability
- Zone hardened inner race
- Land riding retainer
- Lithium complex NLGI #2 grease with an EP additive
-
Alternative Part Number2-215
-
UNSPSC31171537
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
4-1/2" X 7/8" MEDIUM FLAP DISCS
BBI 460181 Partially Threaded Hex Bolt/Screw, M16x2, 110 mm L Under Head, 10.9 Grade, Alloy Steel, Zinc Blue CR+3
BBI 460181 Partially Threaded Hex Bolt/Screw, M16x2, 110 mm L Under Head, 10.9 Grade, Alloy Steel, Zinc Blue CR+3
8-MM X 1.25X20-MM HEX HEAD CAPSCREW-MET93108020 >
97-DB 12/24-V BACK-UP ALARMS-NASBA1A>
Wilton® WL9-14243 Spark-Duty™ 400P Deep Throat Regular Duty C-Clamp, 3-1/4 in D Throat, 0 to 4-1/4 in Clamping, 3/4 in Screw
Wilton® Spark-Duty™ 400 series c-clamps are ideal for steel fabrication and industrial welding. Each boasts drop forged construction an ACME rolled copper plated spindle to resist welding spatter, replaceable Perma-Pads® and a V-grooved anvil for secure holding of all materials.

