Pressure Washer Accessories
High-Pressure Hose, Premium Grade, 3/8 inch x 50ft Hose FOR75183
PRESSURE WASHER ACCESSORIES, HOSE, 3/8" X 50' HIGH PRESSURE 3000 PSI - 3/8 inch (9.53 mm) Male National Pipe Thread (MNPT) solid fitting and one 3/8 inch (9.53 mm) MNPT swivel fitting.
PRESSURE WASHER ACCESSORIES, INLET WATER STRAINER, 1/2" F-NATIONAL PIPE THREAD INLET, 1/2" M-NATIONAL PIPE THREAD OUTLET - The strainer is placed between the garden hose and the pressure washer to prevent debris from entering the pump from the water source. The inlet filter replaces the garden hose small filter screen.
100' BLACK PRESSURE WASHER HOSE-FTGPW3000SR100X >
50' BLACK PRESSURE WASHER HOSE-FTGPW3000SR50X >
50' 4000-PSI PRESSURE WASHER HOSE-FTGPW4000BSR50X >
3/8" X 100-FT PRESSURE WASHER HOSE-FTGPW4000SR100X>
3/8" X 50' PRESSURE WASHER HOSE - FTGPW4000SR50X>
100' 4000-PSI PRESSURE WASHER HOSE-FTGPW4500SR100X >
3/8" 6000 PSI PRESSURE WASHER HOSE-FTGPW6000FT >
100' 6000-PSI PRESSURE WASHER HOSE-FTGPW6000SR100X >
50' 6000-PSI PRESSURE WASHER HOSE-FTGPW6000SR50X >
PRESSURE WASHER ACCESSORIES, QUICK CONNECT BLASTING NOZZLE, 0X4.5MM. RED
PRESSURE WASHER ACCESSORIES, QUICK CONNECT CHISELING NOZZLE, 15X5.5MM. YELLOW
PRESSURE WASHER ACCESSORIES, QUICK CONNECT WASH NOZZLE, 40X4.5MM. WHITE
PRESSURE WASHER ACCESSORIES, NOZZLE, ROTATING TURBO NOZZLE, 4.5MM ORIFICE WITH 1/4" F-NATIONAL PIPE THREAD INLET, 3600 PSI
SOAP STRAINER FOR 1/"4 OR 3/8" HOSE - Chemical strainer with built-in stainless steel check valve and step down hose barb to attach either 1/4 inch (6.35 mm) or 3/8 inch (9.53 mm) hoses. Attach the strainer to the hose and place it in the soap container. The strainer has an internal brass weight that keeps the strainer at the bottom of the container.
PRESSURE WASHER ACCESSORIES, SPRAY NOZZLE ASSORTMENT, 4.5MM, 5 PIECE - The job pack includes one-each stainless steel Blasting (0° - red), Chiseling (15° - yellow), Flushing (25° - green), and Washing (40° - white) QC spray nozzles, and one brass Soap (65° - black) QC spray nozzle.
Recently Viewed
Browning® 767686 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-5/8 in Dia Bore, 5-13/64 to 6-7/64 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-3/8 in OAL x 4-1/4 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
48" STEEL HANDLE POST HOLE DIGGER-JWH704483>
1-GAL SHELL 15-W-40 ROTELLA OIL-SHL56026 >
Remke Tuff-Seal™ RSR-110 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 2, 3, 4 Conductors, 0.562 to 0.625 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-110 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 2, 3, 4 Conductors, 0.562 to 0.625 in Cable Openings, Aluminum, Nickel Plated
Browning® 767901 VF2E 200 Non-Expansion Normal Duty Ball Bearing Unit With Seal Flinger, 7/8 in Dia Bore, 3-57/64 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 4-7/8 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Boot and Shoe Brush, Poly Bristle, Steel Frame
